FhSim  3.1.0
Marine systems simulation
Loading...
Searching...
No Matches
Validation: a3/b4 consistency and refit (L9)

Table of Contents

Whether the default angle harmonics a3 = 0.07, b4 = 0.10 of LocalThroughFlow satisfy the independent angle data (Rudi L5, Zhan L8), and the least-squares refit over MF2022, Rudi and Zhan. The refit is reported only; the law is not tuned (lead ruling R20). Data: Validation: MF2022 towed panels (L1-L4), Validation: Rudi 1988 and Løland 1991 (L5, L6), Validation: Zhan 2006 planar nets and cylinder (L8, S2, W9, S6).

Known misfit, disclosed by owner decision (2026-09-27). The default law's two-harmonic KF2012 Eq. 14 angle form misfits MF2022 lift at high solidity (CL(45°) 26–31 % low for N33a, N36a and N33b; N33a lift 196 N against 271 N) and the angle dependence of Rudi, Løland and Zhan at 60–80° (Rudi drag ratio low by up to 0.154, lift ratio by up to 0.358; Løland C_L outside ±25 % in 31 of 80 rows; Zhan R60/R0 off by up to −0.184, speed trend up to +38.7 %). The L9 refit (a3 = 0.046, b4 = 0.050) leaves 16 of 66 L5/L8 checks failing, as the defaults do, so the form itself misfits. The owner chose to disclose this now and to replace the angle form later (0131 — Default law: replace the two-harmonic angle form with three harmonics, refitted to MF2022, Rudi, Løland and Zhan); the 11 load-law tests that fail stay DISABLED_ (0110 — Default load law misses lift at high solidity and the angle dependence of Rudi, Løland and Zhan (A6 disabled tests)), and nothing is tuned to pass them. Details: 11.4 The default law's angle form misfits lift and 60–80° (MARE-0110).

Generated 2026-10-03 from commit 87e60a3 2026-10-03; tests run 2026-10-03T09:10:34.294 (main entry) and 2026-10-03T09:11:16.576 (VALIDATION entry).

Tests

Status from the gtest XML of the last run. A DISABLED_ test fails against the current laws; its numbers are in the tables below, and it stays disabled until the owner decides the issue.

Test Source Status Issues Owner question
PanelLoadLaw_Consistency.DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8 PanelLoadLaw_Consistency_Test.cpp:212 DISABLED MARE-0093 (resolved), MARE-0110, MARE-0131 –
PanelLoadLaw_Consistency.L9_RefitOfA3AndB4IsReported PanelLoadLaw_Consistency_Test.cpp:150 passed – –

PanelLoadLaw A3B4 fit

tests/out/PanelLoadLaw_A3B4_fit.txt, as the test wrote it.

PanelLoadLaw a3/b4 refit (plan L9, MARE-0093). Reported only; the law is not tuned.

Conventions: error = model/measured - 1 (in %) for loads and coefficients, model - measured for ratios and localCd; ratio = measured/model; margin = tolerance - |error| (negative = fails).

Model: LocalThroughFlow, C_D(theta) = cd ((1 - a3) cos theta + a3 cos 3 theta), C_L(theta) = cl (sin 2 theta + b4 sin 4 theta). Unweighted least squares on absolute ratio residuals.

Fit data: MF2022 Eq. 10 CD(45)/CD(0) at Rn = 2000 (8 Table 2 nets); Rudi (KF2012 Fig. 5) all points; Zhan R30/R0 and R60/R0 at 0.5-1.0 m/s, K = 1. a3 from the drag ratios, b4 from the Rudi lift ratios (the other two datasets carry no b4 information).

Defaults (contract C2): a3 = 0.0700, b4 = 0.1000

Refit over all datasets: a3 = 0.0456 (50 points), b4 = 0.0498 (24 points)

Per-dataset fits:

MF2022 Eq. 10 CD(45)/CD(0), 8 nets a3 alone = 0.0717 ( 8 points)
Rudi C_D(theta)/C_D(0) a3 alone = 0.0347 (24 points)
Zhan R30/R0, R60/R0 (0.5-1.0 m/s, K = 1) a3 alone = 0.0390 (18 points)
Rudi C_L(theta)/C_L(45) b4 alone = 0.0498 (24 points)

Residuals:

MF2022 Eq. 10 CD(45)/CD(0), 8 nets RMS(model - measured): default 0.0109, refit 0.0384
Rudi C_D(theta)/C_D(0) RMS(model - measured): default 0.0645, refit 0.0560
Zhan R30/R0, R60/R0 (0.5-1.0 m/s, K = 1) RMS(model - measured): default 0.0831, refit 0.0743
Rudi C_L(theta)/C_L(45) RMS(model - measured): default 0.0975, refit 0.0933

L9 checks (L5 tolerance 0.08, L8 ratio tolerance 0.10): 16 of 66 fail at the defaults, 16 of 66 fail at the refit.

L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8)

DISABLED test; 66 rows, 16 of 66 outside the tolerance.

Chart: L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8); L9 at the refit a3 0.0456, b4 0.0498 (reported).

Model minus measurement per case with the tolerance band L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8) L9 at the refit a3 0.0456, b4 0.0498 (reported) L9 at the refit a3 0.0456, b4 0.0498 (reported) -0.2 0 model − measured; shaded: tolerance Sn 0.130 CD( 0)/CD(0) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.130 CD( 0)/CD(0): measured 1, model 1, error 0.000, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.130 CD( 0)/CD(0): measured 1, model 1, error 0.000, tolerance ±0.08 Sn 0.130 CD(30)/CD(0) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.130 CD(30)/CD(0): measured 0.845, model 0.8054, error -0.040, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.130 CD(30)/CD(0): measured 0.845, model 0.8265, error -0.018, tolerance ±0.08 Sn 0.130 CD(45)/CD(0) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.130 CD(45)/CD(0): measured 0.655, model 0.6081, error -0.047, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.130 CD(45)/CD(0): measured 0.655, model 0.6426, error -0.012, tolerance ±0.08 Sn 0.130 CD(60)/CD(0) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.130 CD(60)/CD(0): measured 0.483, model 0.395, error -0.088, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.130 CD(60)/CD(0): measured 0.483, model 0.4315, error -0.051, tolerance ±0.08 Sn 0.130 CD(80)/CD(0) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.130 CD(80)/CD(0): measured 0.276, model 0.1265, error -0.150, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.130 CD(80)/CD(0): measured 0.276, model 0.1429, error -0.133, tolerance ±0.08 Sn 0.130 CD(90)/CD(0) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.130 CD(90)/CD(0): measured 0, model 4.409e-17, error 0.000, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.130 CD(90)/CD(0): measured 0, model 5.005e-17, error 0.000, tolerance ±0.08 Sn 0.144 CD( 0)/CD(0) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.144 CD( 0)/CD(0): measured 1, model 1, error 0.000, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.144 CD( 0)/CD(0): measured 1, model 1, error 0.000, tolerance ±0.08 Sn 0.144 CD(30)/CD(0) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.144 CD(30)/CD(0): measured 0.778, model 0.8054, error 0.027, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.144 CD(30)/CD(0): measured 0.778, model 0.8265, error 0.049, tolerance ±0.08 Sn 0.144 CD(45)/CD(0) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.144 CD(45)/CD(0): measured 0.635, model 0.6081, error -0.027, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.144 CD(45)/CD(0): measured 0.635, model 0.6426, error 0.008, tolerance ±0.08 Sn 0.144 CD(60)/CD(0) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.144 CD(60)/CD(0): measured 0.492, model 0.395, error -0.097, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.144 CD(60)/CD(0): measured 0.492, model 0.4315, error -0.060, tolerance ±0.08 Sn 0.144 CD(80)/CD(0) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.144 CD(80)/CD(0): measured 0.238, model 0.1265, error -0.112, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.144 CD(80)/CD(0): measured 0.238, model 0.1429, error -0.095, tolerance ±0.08 Sn 0.144 CD(90)/CD(0) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.144 CD(90)/CD(0): measured 0.032, model 4.409e-17, error -0.032, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.144 CD(90)/CD(0): measured 0.032, model 5.005e-17, error -0.032, tolerance ±0.08 Sn 0.184 CD( 0)/CD(0) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.184 CD( 0)/CD(0): measured 1, model 1, error 0.000, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.184 CD( 0)/CD(0): measured 1, model 1, error 0.000, tolerance ±0.08 Sn 0.184 CD(30)/CD(0) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.184 CD(30)/CD(0): measured 0.736, model 0.8054, error 0.069, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.184 CD(30)/CD(0): measured 0.736, model 0.8265, error 0.091, tolerance ±0.08 Sn 0.184 CD(45)/CD(0) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.184 CD(45)/CD(0): measured 0.626, model 0.6081, error -0.018, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.184 CD(45)/CD(0): measured 0.626, model 0.6426, error 0.017, tolerance ±0.08 Sn 0.184 CD(60)/CD(0) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.184 CD(60)/CD(0): measured 0.549, model 0.395, error -0.154, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.184 CD(60)/CD(0): measured 0.549, model 0.4315, error -0.117, tolerance ±0.08 Sn 0.184 CD(80)/CD(0) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.184 CD(80)/CD(0): measured 0.231, model 0.1265, error -0.105, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.184 CD(80)/CD(0): measured 0.231, model 0.1429, error -0.088, tolerance ±0.08 Sn 0.184 CD(90)/CD(0) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.184 CD(90)/CD(0): measured 0.011, model 4.409e-17, error -0.011, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.184 CD(90)/CD(0): measured 0.011, model 5.005e-17, error -0.011, tolerance ±0.08 Sn 0.317 CD( 0)/CD(0) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.317 CD( 0)/CD(0): measured 1, model 1, error 0.000, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.317 CD( 0)/CD(0): measured 1, model 1, error 0.000, tolerance ±0.08 Sn 0.317 CD(30)/CD(0) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.317 CD(30)/CD(0): measured 0.792, model 0.8054, error 0.013, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.317 CD(30)/CD(0): measured 0.792, model 0.8265, error 0.035, tolerance ±0.08 Sn 0.317 CD(45)/CD(0) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.317 CD(45)/CD(0): measured 0.575, model 0.6081, error 0.033, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.317 CD(45)/CD(0): measured 0.575, model 0.6426, error 0.068, tolerance ±0.08 Sn 0.317 CD(60)/CD(0) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.317 CD(60)/CD(0): measured 0.389, model 0.395, error 0.006, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.317 CD(60)/CD(0): measured 0.389, model 0.4315, error 0.043, tolerance ±0.08 Sn 0.317 CD(80)/CD(0) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.317 CD(80)/CD(0): measured 0.131, model 0.1265, error -0.005, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.317 CD(80)/CD(0): measured 0.131, model 0.1429, error 0.012, tolerance ±0.08 Sn 0.317 CD(90)/CD(0) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.317 CD(90)/CD(0): measured 0.023, model 4.409e-17, error -0.023, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.317 CD(90)/CD(0): measured 0.023, model 5.005e-17, error -0.023, tolerance ±0.08 Sn 0.130 CL( 0)/CL(45) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.130 CL( 0)/CL(45): measured 0, model 0, error 0.000, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.130 CL( 0)/CL(45): measured 0, model 0, error 0.000, tolerance ±0.08 Sn 0.130 CL(30)/CL(45) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.130 CL(30)/CL(45): measured 1, model 0.9526, error -0.047, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.130 CL(30)/CL(45): measured 1, model 0.9092, error -0.091, tolerance ±0.08 Sn 0.130 CL(45)/CL(45) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.130 CL(45)/CL(45): measured 1, model 1, error 0.000, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.130 CL(45)/CL(45): measured 1, model 1, error 0.000, tolerance ±0.08 Sn 0.130 CL(60)/CL(45) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.130 CL(60)/CL(45): measured 0.909, model 0.7794, error -0.130, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.130 CL(60)/CL(45): measured 0.909, model 0.8229, error -0.086, tolerance ±0.08 Sn 0.130 CL(80)/CL(45) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.130 CL(80)/CL(45): measured 0.455, model 0.2777, error -0.177, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.130 CL(80)/CL(45): measured 0.455, model 0.31, error -0.145, tolerance ±0.08 Sn 0.130 CL(90)/CL(45) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.130 CL(90)/CL(45): measured 0, model 9.797e-17, error 0.000, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.130 CL(90)/CL(45): measured 0, model 1.103e-16, error 0.000, tolerance ±0.08 Sn 0.144 CL( 0)/CL(45) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.144 CL( 0)/CL(45): measured 0, model 0, error 0.000, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.144 CL( 0)/CL(45): measured 0, model 0, error 0.000, tolerance ±0.08 Sn 0.144 CL(30)/CL(45) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.144 CL(30)/CL(45): measured 1.091, model 0.9526, error -0.138, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.144 CL(30)/CL(45): measured 1.091, model 0.9092, error -0.182, tolerance ±0.08 Sn 0.144 CL(45)/CL(45) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.144 CL(45)/CL(45): measured 1, model 1, error 0.000, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.144 CL(45)/CL(45): measured 1, model 1, error 0.000, tolerance ±0.08 Sn 0.144 CL(60)/CL(45) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.144 CL(60)/CL(45): measured 0.909, model 0.7794, error -0.130, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.144 CL(60)/CL(45): measured 0.909, model 0.8229, error -0.086, tolerance ±0.08 Sn 0.144 CL(80)/CL(45) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.144 CL(80)/CL(45): measured 0.636, model 0.2777, error -0.358, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.144 CL(80)/CL(45): measured 0.636, model 0.31, error -0.326, tolerance ±0.08 Sn 0.144 CL(90)/CL(45) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.144 CL(90)/CL(45): measured 0, model 9.797e-17, error 0.000, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.144 CL(90)/CL(45): measured 0, model 1.103e-16, error 0.000, tolerance ±0.08 Sn 0.184 CL( 0)/CL(45) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.184 CL( 0)/CL(45): measured 0, model 0, error 0.000, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.184 CL( 0)/CL(45): measured 0, model 0, error 0.000, tolerance ±0.08 Sn 0.184 CL(30)/CL(45) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.184 CL(30)/CL(45): measured 1, model 0.9526, error -0.047, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.184 CL(30)/CL(45): measured 1, model 0.9092, error -0.091, tolerance ±0.08 Sn 0.184 CL(45)/CL(45) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.184 CL(45)/CL(45): measured 1, model 1, error 0.000, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.184 CL(45)/CL(45): measured 1, model 1, error 0.000, tolerance ±0.08 Sn 0.184 CL(60)/CL(45) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.184 CL(60)/CL(45): measured 0.8, model 0.7794, error -0.021, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.184 CL(60)/CL(45): measured 0.8, model 0.8229, error 0.023, tolerance ±0.08 Sn 0.184 CL(80)/CL(45) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.184 CL(80)/CL(45): measured 0.35, model 0.2777, error -0.072, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.184 CL(80)/CL(45): measured 0.35, model 0.31, error -0.040, tolerance ±0.08 Sn 0.184 CL(90)/CL(45) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.184 CL(90)/CL(45): measured 0, model 9.797e-17, error 0.000, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.184 CL(90)/CL(45): measured 0, model 1.103e-16, error 0.000, tolerance ±0.08 Sn 0.317 CL( 0)/CL(45) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.317 CL( 0)/CL(45): measured 0, model 0, error 0.000, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.317 CL( 0)/CL(45): measured 0, model 0, error 0.000, tolerance ±0.08 Sn 0.317 CL(30)/CL(45) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.317 CL(30)/CL(45): measured 1.019, model 0.9526, error -0.066, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.317 CL(30)/CL(45): measured 1.019, model 0.9092, error -0.110, tolerance ±0.08 Sn 0.317 CL(45)/CL(45) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.317 CL(45)/CL(45): measured 1, model 1, error 0.000, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.317 CL(45)/CL(45): measured 1, model 1, error 0.000, tolerance ±0.08 Sn 0.317 CL(60)/CL(45) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.317 CL(60)/CL(45): measured 0.769, model 0.7794, error 0.010, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.317 CL(60)/CL(45): measured 0.769, model 0.8229, error 0.054, tolerance ±0.08 Sn 0.317 CL(80)/CL(45) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.317 CL(80)/CL(45): measured 0.308, model 0.2777, error -0.030, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.317 CL(80)/CL(45): measured 0.308, model 0.31, error 0.002, tolerance ±0.08 Sn 0.317 CL(90)/CL(45) L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): Sn 0.317 CL(90)/CL(45): measured 0, model 9.797e-17, error 0.000, tolerance ±0.08 L9 at the refit a3 0.0456, b4 0.0498 (reported): Sn 0.317 CL(90)/CL(45): measured 0, model 1.103e-16, error 0.000, tolerance ±0.08 s 0.223 v 0.50 R30/R0 L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): s 0.223 v 0.50 R30/R0: measured 0.8231, model 0.8054, error -0.018, tolerance ±0.1 L9 at the refit a3 0.0456, b4 0.0498 (reported): s 0.223 v 0.50 R30/R0: measured 0.8231, model 0.8265, error 0.003, tolerance ±0.1 s 0.223 v 0.50 R60/R0 L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): s 0.223 v 0.50 R60/R0: measured 0.5052, model 0.395, error -0.110, tolerance ±0.1 L9 at the refit a3 0.0456, b4 0.0498 (reported): s 0.223 v 0.50 R60/R0: measured 0.5052, model 0.4315, error -0.074, tolerance ±0.1 s 0.223 v 0.75 R30/R0 L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): s 0.223 v 0.75 R30/R0: measured 0.7669, model 0.8054, error 0.038, tolerance ±0.1 L9 at the refit a3 0.0456, b4 0.0498 (reported): s 0.223 v 0.75 R30/R0: measured 0.7669, model 0.8265, error 0.060, tolerance ±0.1 s 0.223 v 0.75 R60/R0 L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): s 0.223 v 0.75 R60/R0: measured 0.5445, model 0.395, error -0.149, tolerance ±0.1 L9 at the refit a3 0.0456, b4 0.0498 (reported): s 0.223 v 0.75 R60/R0: measured 0.5445, model 0.4315, error -0.113, tolerance ±0.1 s 0.223 v 1.00 R30/R0 L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): s 0.223 v 1.00 R30/R0: measured 0.8249, model 0.8054, error -0.019, tolerance ±0.1 L9 at the refit a3 0.0456, b4 0.0498 (reported): s 0.223 v 1.00 R30/R0: measured 0.8249, model 0.8265, error 0.002, tolerance ±0.1 s 0.223 v 1.00 R60/R0 L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): s 0.223 v 1.00 R60/R0: measured 0.5791, model 0.395, error -0.184, tolerance ±0.1 L9 at the refit a3 0.0456, b4 0.0498 (reported): s 0.223 v 1.00 R60/R0: measured 0.5791, model 0.4315, error -0.148, tolerance ±0.1 s 0.128 v 0.50 R30/R0 L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): s 0.128 v 0.50 R30/R0: measured 0.7708, model 0.8054, error 0.035, tolerance ±0.1 L9 at the refit a3 0.0456, b4 0.0498 (reported): s 0.128 v 0.50 R30/R0: measured 0.7708, model 0.8265, error 0.056, tolerance ±0.1 s 0.128 v 0.50 R60/R0 L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): s 0.128 v 0.50 R60/R0: measured 0.4048, model 0.395, error -0.010, tolerance ±0.1 L9 at the refit a3 0.0456, b4 0.0498 (reported): s 0.128 v 0.50 R60/R0: measured 0.4048, model 0.4315, error 0.027, tolerance ±0.1 s 0.128 v 0.75 R30/R0 L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): s 0.128 v 0.75 R30/R0: measured 0.6742, model 0.8054, error 0.131, tolerance ±0.1 L9 at the refit a3 0.0456, b4 0.0498 (reported): s 0.128 v 0.75 R30/R0: measured 0.6742, model 0.8265, error 0.152, tolerance ±0.1 s 0.128 v 0.75 R60/R0 L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): s 0.128 v 0.75 R60/R0: measured 0.4541, model 0.395, error -0.059, tolerance ±0.1 L9 at the refit a3 0.0456, b4 0.0498 (reported): s 0.128 v 0.75 R60/R0: measured 0.4541, model 0.4315, error -0.023, tolerance ±0.1 s 0.128 v 1.00 R30/R0 L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): s 0.128 v 1.00 R30/R0: measured 0.7756, model 0.8054, error 0.030, tolerance ±0.1 L9 at the refit a3 0.0456, b4 0.0498 (reported): s 0.128 v 1.00 R30/R0: measured 0.7756, model 0.8265, error 0.051, tolerance ±0.1 s 0.128 v 1.00 R60/R0 L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): s 0.128 v 1.00 R60/R0: measured 0.5141, model 0.395, error -0.119, tolerance ±0.1 L9 at the refit a3 0.0456, b4 0.0498 (reported): s 0.128 v 1.00 R60/R0: measured 0.5141, model 0.4315, error -0.083, tolerance ±0.1 s 0.215 v 0.50 R30/R0 L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): s 0.215 v 0.50 R30/R0: measured 0.759, model 0.8054, error 0.046, tolerance ±0.1 L9 at the refit a3 0.0456, b4 0.0498 (reported): s 0.215 v 0.50 R30/R0: measured 0.759, model 0.8265, error 0.067, tolerance ±0.1 s 0.215 v 0.50 R60/R0 L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): s 0.215 v 0.50 R60/R0: measured 0.3769, model 0.395, error 0.018, tolerance ±0.1 L9 at the refit a3 0.0456, b4 0.0498 (reported): s 0.215 v 0.50 R60/R0: measured 0.3769, model 0.4315, error 0.055, tolerance ±0.1 s 0.215 v 0.75 R30/R0 L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): s 0.215 v 0.75 R30/R0: measured 0.7313, model 0.8054, error 0.074, tolerance ±0.1 L9 at the refit a3 0.0456, b4 0.0498 (reported): s 0.215 v 0.75 R30/R0: measured 0.7313, model 0.8265, error 0.095, tolerance ±0.1 s 0.215 v 0.75 R60/R0 L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): s 0.215 v 0.75 R60/R0: measured 0.4376, model 0.395, error -0.043, tolerance ±0.1 L9 at the refit a3 0.0456, b4 0.0498 (reported): s 0.215 v 0.75 R60/R0: measured 0.4376, model 0.4315, error -0.006, tolerance ±0.1 s 0.215 v 1.00 R30/R0 L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): s 0.215 v 1.00 R30/R0: measured 0.8092, model 0.8054, error -0.004, tolerance ±0.1 L9 at the refit a3 0.0456, b4 0.0498 (reported): s 0.215 v 1.00 R30/R0: measured 0.8092, model 0.8265, error 0.017, tolerance ±0.1 s 0.215 v 1.00 R60/R0 L9 at the defaults a3 0.07, b4 0.10 (DISABLED_L9_DefaultHarmonicsSatisfyL5AndL8): s 0.215 v 1.00 R60/R0: measured 0.4771, model 0.395, error -0.082, tolerance ±0.1 L9 at the refit a3 0.0456, b4 0.0498 (reported): s 0.215 v 1.00 R60/R0: measured 0.4771, model 0.4315, error -0.046, tolerance ±0.1

Case Measured Model Error Tolerance Margin Result
Sn 0.130 CD( 0)/CD(0) 1 1 0 ±0.08 0.08 within
Sn 0.130 CD(30)/CD(0) 0.845 0.8054 -0.04 ±0.08 0.04 within
Sn 0.130 CD(45)/CD(0) 0.655 0.6081 -0.047 ±0.08 0.033 within
Sn 0.130 CD(60)/CD(0) 0.483 0.395 -0.088 ±0.08 -0.008 outside
Sn 0.130 CD(80)/CD(0) 0.276 0.1265 -0.15 ±0.08 -0.07 outside
Sn 0.130 CD(90)/CD(0) 0 4.409e-17 0 ±0.08 0.08 within
Sn 0.144 CD( 0)/CD(0) 1 1 0 ±0.08 0.08 within
Sn 0.144 CD(30)/CD(0) 0.778 0.8054 0.027 ±0.08 0.053 within
Sn 0.144 CD(45)/CD(0) 0.635 0.6081 -0.027 ±0.08 0.053 within
Sn 0.144 CD(60)/CD(0) 0.492 0.395 -0.097 ±0.08 -0.017 outside
Sn 0.144 CD(80)/CD(0) 0.238 0.1265 -0.112 ±0.08 -0.032 outside
Sn 0.144 CD(90)/CD(0) 0.032 4.409e-17 -0.032 ±0.08 0.048 within
Sn 0.184 CD( 0)/CD(0) 1 1 0 ±0.08 0.08 within
Sn 0.184 CD(30)/CD(0) 0.736 0.8054 0.069 ±0.08 0.011 within
Sn 0.184 CD(45)/CD(0) 0.626 0.6081 -0.018 ±0.08 0.062 within
Sn 0.184 CD(60)/CD(0) 0.549 0.395 -0.154 ±0.08 -0.074 outside
Sn 0.184 CD(80)/CD(0) 0.231 0.1265 -0.105 ±0.08 -0.025 outside
Sn 0.184 CD(90)/CD(0) 0.011 4.409e-17 -0.011 ±0.08 0.069 within
Sn 0.317 CD( 0)/CD(0) 1 1 0 ±0.08 0.08 within
Sn 0.317 CD(30)/CD(0) 0.792 0.8054 0.013 ±0.08 0.067 within
Sn 0.317 CD(45)/CD(0) 0.575 0.6081 0.033 ±0.08 0.047 within
Sn 0.317 CD(60)/CD(0) 0.389 0.395 0.006 ±0.08 0.074 within
Sn 0.317 CD(80)/CD(0) 0.131 0.1265 -0.005 ±0.08 0.075 within
Sn 0.317 CD(90)/CD(0) 0.023 4.409e-17 -0.023 ±0.08 0.057 within
Sn 0.130 CL( 0)/CL(45) 0 0 0 ±0.08 0.08 within
Sn 0.130 CL(30)/CL(45) 1 0.9526 -0.047 ±0.08 0.033 within
Sn 0.130 CL(45)/CL(45) 1 1 0 ±0.08 0.08 within
Sn 0.130 CL(60)/CL(45) 0.909 0.7794 -0.13 ±0.08 -0.05 outside
Sn 0.130 CL(80)/CL(45) 0.455 0.2777 -0.177 ±0.08 -0.097 outside
Sn 0.130 CL(90)/CL(45) 0 9.797e-17 0 ±0.08 0.08 within
Sn 0.144 CL( 0)/CL(45) 0 0 0 ±0.08 0.08 within
Sn 0.144 CL(30)/CL(45) 1.091 0.9526 -0.138 ±0.08 -0.058 outside
Sn 0.144 CL(45)/CL(45) 1 1 0 ±0.08 0.08 within
Sn 0.144 CL(60)/CL(45) 0.909 0.7794 -0.13 ±0.08 -0.05 outside
Sn 0.144 CL(80)/CL(45) 0.636 0.2777 -0.358 ±0.08 -0.278 outside
Sn 0.144 CL(90)/CL(45) 0 9.797e-17 0 ±0.08 0.08 within
Sn 0.184 CL( 0)/CL(45) 0 0 0 ±0.08 0.08 within
Sn 0.184 CL(30)/CL(45) 1 0.9526 -0.047 ±0.08 0.033 within
Sn 0.184 CL(45)/CL(45) 1 1 0 ±0.08 0.08 within
Sn 0.184 CL(60)/CL(45) 0.8 0.7794 -0.021 ±0.08 0.059 within
Sn 0.184 CL(80)/CL(45) 0.35 0.2777 -0.072 ±0.08 0.008 within
Sn 0.184 CL(90)/CL(45) 0 9.797e-17 0 ±0.08 0.08 within
Sn 0.317 CL( 0)/CL(45) 0 0 0 ±0.08 0.08 within
Sn 0.317 CL(30)/CL(45) 1.019 0.9526 -0.066 ±0.08 0.014 within
Sn 0.317 CL(45)/CL(45) 1 1 0 ±0.08 0.08 within
Sn 0.317 CL(60)/CL(45) 0.769 0.7794 0.01 ±0.08 0.07 within
Sn 0.317 CL(80)/CL(45) 0.308 0.2777 -0.03 ±0.08 0.05 within
Sn 0.317 CL(90)/CL(45) 0 9.797e-17 0 ±0.08 0.08 within
s 0.223 v 0.50 R30/R0 0.8231 0.8054 -0.018 ±0.1 0.082 within
s 0.223 v 0.50 R60/R0 0.5052 0.395 -0.11 ±0.1 -0.01 outside
s 0.223 v 0.75 R30/R0 0.7669 0.8054 0.038 ±0.1 0.062 within
s 0.223 v 0.75 R60/R0 0.5445 0.395 -0.149 ±0.1 -0.049 outside
s 0.223 v 1.00 R30/R0 0.8249 0.8054 -0.019 ±0.1 0.081 within
s 0.223 v 1.00 R60/R0 0.5791 0.395 -0.184 ±0.1 -0.084 outside
s 0.128 v 0.50 R30/R0 0.7708 0.8054 0.035 ±0.1 0.065 within
s 0.128 v 0.50 R60/R0 0.4048 0.395 -0.01 ±0.1 0.09 within
s 0.128 v 0.75 R30/R0 0.6742 0.8054 0.131 ±0.1 -0.031 outside
s 0.128 v 0.75 R60/R0 0.4541 0.395 -0.059 ±0.1 0.041 within
s 0.128 v 1.00 R30/R0 0.7756 0.8054 0.03 ±0.1 0.07 within
s 0.128 v 1.00 R60/R0 0.5141 0.395 -0.119 ±0.1 -0.019 outside
s 0.215 v 0.50 R30/R0 0.759 0.8054 0.046 ±0.1 0.054 within
s 0.215 v 0.50 R60/R0 0.3769 0.395 0.018 ±0.1 0.082 within
s 0.215 v 0.75 R30/R0 0.7313 0.8054 0.074 ±0.1 0.026 within
s 0.215 v 0.75 R60/R0 0.4376 0.395 -0.043 ±0.1 0.057 within
s 0.215 v 1.00 R30/R0 0.8092 0.8054 -0.004 ±0.1 0.096 within
s 0.215 v 1.00 R60/R0 0.4771 0.395 -0.082 ±0.1 0.018 within

L9 at the refit a3 0.0456, b4 0.0498 (reported)

reported; 66 rows, 16 of 66 outside the tolerance.

Case Measured Model Error Tolerance Margin Result
Sn 0.130 CD( 0)/CD(0) 1 1 0 ±0.08 0.08 within
Sn 0.130 CD(30)/CD(0) 0.845 0.8265 -0.018 ±0.08 0.062 within
Sn 0.130 CD(45)/CD(0) 0.655 0.6426 -0.012 ±0.08 0.068 within
Sn 0.130 CD(60)/CD(0) 0.483 0.4315 -0.051 ±0.08 0.029 within
Sn 0.130 CD(80)/CD(0) 0.276 0.1429 -0.133 ±0.08 -0.053 outside
Sn 0.130 CD(90)/CD(0) 0 5.005e-17 0 ±0.08 0.08 within
Sn 0.144 CD( 0)/CD(0) 1 1 0 ±0.08 0.08 within
Sn 0.144 CD(30)/CD(0) 0.778 0.8265 0.049 ±0.08 0.031 within
Sn 0.144 CD(45)/CD(0) 0.635 0.6426 0.008 ±0.08 0.072 within
Sn 0.144 CD(60)/CD(0) 0.492 0.4315 -0.06 ±0.08 0.02 within
Sn 0.144 CD(80)/CD(0) 0.238 0.1429 -0.095 ±0.08 -0.015 outside
Sn 0.144 CD(90)/CD(0) 0.032 5.005e-17 -0.032 ±0.08 0.048 within
Sn 0.184 CD( 0)/CD(0) 1 1 0 ±0.08 0.08 within
Sn 0.184 CD(30)/CD(0) 0.736 0.8265 0.091 ±0.08 -0.011 outside
Sn 0.184 CD(45)/CD(0) 0.626 0.6426 0.017 ±0.08 0.063 within
Sn 0.184 CD(60)/CD(0) 0.549 0.4315 -0.117 ±0.08 -0.037 outside
Sn 0.184 CD(80)/CD(0) 0.231 0.1429 -0.088 ±0.08 -0.008 outside
Sn 0.184 CD(90)/CD(0) 0.011 5.005e-17 -0.011 ±0.08 0.069 within
Sn 0.317 CD( 0)/CD(0) 1 1 0 ±0.08 0.08 within
Sn 0.317 CD(30)/CD(0) 0.792 0.8265 0.035 ±0.08 0.045 within
Sn 0.317 CD(45)/CD(0) 0.575 0.6426 0.068 ±0.08 0.012 within
Sn 0.317 CD(60)/CD(0) 0.389 0.4315 0.043 ±0.08 0.037 within
Sn 0.317 CD(80)/CD(0) 0.131 0.1429 0.012 ±0.08 0.068 within
Sn 0.317 CD(90)/CD(0) 0.023 5.005e-17 -0.023 ±0.08 0.057 within
Sn 0.130 CL( 0)/CL(45) 0 0 0 ±0.08 0.08 within
Sn 0.130 CL(30)/CL(45) 1 0.9092 -0.091 ±0.08 -0.011 outside
Sn 0.130 CL(45)/CL(45) 1 1 0 ±0.08 0.08 within
Sn 0.130 CL(60)/CL(45) 0.909 0.8229 -0.086 ±0.08 -0.006 outside
Sn 0.130 CL(80)/CL(45) 0.455 0.31 -0.145 ±0.08 -0.065 outside
Sn 0.130 CL(90)/CL(45) 0 1.103e-16 0 ±0.08 0.08 within
Sn 0.144 CL( 0)/CL(45) 0 0 0 ±0.08 0.08 within
Sn 0.144 CL(30)/CL(45) 1.091 0.9092 -0.182 ±0.08 -0.102 outside
Sn 0.144 CL(45)/CL(45) 1 1 0 ±0.08 0.08 within
Sn 0.144 CL(60)/CL(45) 0.909 0.8229 -0.086 ±0.08 -0.006 outside
Sn 0.144 CL(80)/CL(45) 0.636 0.31 -0.326 ±0.08 -0.246 outside
Sn 0.144 CL(90)/CL(45) 0 1.103e-16 0 ±0.08 0.08 within
Sn 0.184 CL( 0)/CL(45) 0 0 0 ±0.08 0.08 within
Sn 0.184 CL(30)/CL(45) 1 0.9092 -0.091 ±0.08 -0.011 outside
Sn 0.184 CL(45)/CL(45) 1 1 0 ±0.08 0.08 within
Sn 0.184 CL(60)/CL(45) 0.8 0.8229 0.023 ±0.08 0.057 within
Sn 0.184 CL(80)/CL(45) 0.35 0.31 -0.04 ±0.08 0.04 within
Sn 0.184 CL(90)/CL(45) 0 1.103e-16 0 ±0.08 0.08 within
Sn 0.317 CL( 0)/CL(45) 0 0 0 ±0.08 0.08 within
Sn 0.317 CL(30)/CL(45) 1.019 0.9092 -0.11 ±0.08 -0.03 outside
Sn 0.317 CL(45)/CL(45) 1 1 0 ±0.08 0.08 within
Sn 0.317 CL(60)/CL(45) 0.769 0.8229 0.054 ±0.08 0.026 within
Sn 0.317 CL(80)/CL(45) 0.308 0.31 0.002 ±0.08 0.078 within
Sn 0.317 CL(90)/CL(45) 0 1.103e-16 0 ±0.08 0.08 within
s 0.223 v 0.50 R30/R0 0.8231 0.8265 0.003 ±0.1 0.097 within
s 0.223 v 0.50 R60/R0 0.5052 0.4315 -0.074 ±0.1 0.026 within
s 0.223 v 0.75 R30/R0 0.7669 0.8265 0.06 ±0.1 0.04 within
s 0.223 v 0.75 R60/R0 0.5445 0.4315 -0.113 ±0.1 -0.013 outside
s 0.223 v 1.00 R30/R0 0.8249 0.8265 0.002 ±0.1 0.098 within
s 0.223 v 1.00 R60/R0 0.5791 0.4315 -0.148 ±0.1 -0.048 outside
s 0.128 v 0.50 R30/R0 0.7708 0.8265 0.056 ±0.1 0.044 within
s 0.128 v 0.50 R60/R0 0.4048 0.4315 0.027 ±0.1 0.073 within
s 0.128 v 0.75 R30/R0 0.6742 0.8265 0.152 ±0.1 -0.052 outside
s 0.128 v 0.75 R60/R0 0.4541 0.4315 -0.023 ±0.1 0.077 within
s 0.128 v 1.00 R30/R0 0.7756 0.8265 0.051 ±0.1 0.049 within
s 0.128 v 1.00 R60/R0 0.5141 0.4315 -0.083 ±0.1 0.017 within
s 0.215 v 0.50 R30/R0 0.759 0.8265 0.067 ±0.1 0.033 within
s 0.215 v 0.50 R60/R0 0.3769 0.4315 0.055 ±0.1 0.045 within
s 0.215 v 0.75 R30/R0 0.7313 0.8265 0.095 ±0.1 0.005 within
s 0.215 v 0.75 R60/R0 0.4376 0.4315 -0.006 ±0.1 0.094 within
s 0.215 v 1.00 R30/R0 0.8092 0.8265 0.017 ±0.1 0.083 within
s 0.215 v 1.00 R60/R0 0.4771 0.4315 -0.046 ±0.1 0.054 within

MF2022 Eq. 10 CD(45)/CD(0) at the defaults (fit data, no tolerance)

reported; 8 rows, no tolerance.

Chart: MF2022 Eq. 10 CD(45)/CD(0) at the defaults (fit data, no tolerance); MF2022 Eq. 10 CD(45)/CD(0) at the refit (fit data, no tolerance).

Model minus measurement per case with the tolerance band MF2022 Eq. 10 CD(45)/CD(0) at the defaults (fit data, no tolerance) MF2022 Eq. 10 CD(45)/CD(0) at the defaults (fit data, no tolerance) MF2022 Eq. 10 CD(45)/CD(0) at the refit (fit data, no tolerance) MF2022 Eq. 10 CD(45)/CD(0) at the refit (fit data, no tolerance) 0 0.02 0.04 0.06 model − measured; shaded: tolerance N19a Snm 0.193 CD(45)/CD(0) MF2022 Eq. 10 CD(45)/CD(0) at the defaults (fit data, no tolerance): N19a Snm 0.193 CD(45)/CD(0): measured 0.6116, model 0.6081, error -0.003 MF2022 Eq. 10 CD(45)/CD(0) at the refit (fit data, no tolerance): N19a Snm 0.193 CD(45)/CD(0): measured 0.6116, model 0.6426, error 0.031 N26a Snm 0.262 CD(45)/CD(0) MF2022 Eq. 10 CD(45)/CD(0) at the defaults (fit data, no tolerance): N26a Snm 0.262 CD(45)/CD(0): measured 0.6161, model 0.6081, error -0.008 MF2022 Eq. 10 CD(45)/CD(0) at the refit (fit data, no tolerance): N26a Snm 0.262 CD(45)/CD(0): measured 0.6161, model 0.6426, error 0.026 N33a Snm 0.331 CD(45)/CD(0) MF2022 Eq. 10 CD(45)/CD(0) at the defaults (fit data, no tolerance): N33a Snm 0.331 CD(45)/CD(0): measured 0.5969, model 0.6081, error 0.011 MF2022 Eq. 10 CD(45)/CD(0) at the refit (fit data, no tolerance): N33a Snm 0.331 CD(45)/CD(0): measured 0.5969, model 0.6426, error 0.046 N36a Snm 0.364 CD(45)/CD(0) MF2022 Eq. 10 CD(45)/CD(0) at the defaults (fit data, no tolerance): N36a Snm 0.364 CD(45)/CD(0): measured 0.5849, model 0.6081, error 0.023 MF2022 Eq. 10 CD(45)/CD(0) at the refit (fit data, no tolerance): N36a Snm 0.364 CD(45)/CD(0): measured 0.5849, model 0.6426, error 0.058 N18b Snm 0.185 CD(45)/CD(0) MF2022 Eq. 10 CD(45)/CD(0) at the defaults (fit data, no tolerance): N18b Snm 0.185 CD(45)/CD(0): measured 0.6074, model 0.6081, error 0.001 MF2022 Eq. 10 CD(45)/CD(0) at the refit (fit data, no tolerance): N18b Snm 0.185 CD(45)/CD(0): measured 0.6074, model 0.6426, error 0.035 N20b Snm 0.199 CD(45)/CD(0) MF2022 Eq. 10 CD(45)/CD(0) at the defaults (fit data, no tolerance): N20b Snm 0.199 CD(45)/CD(0): measured 0.614, model 0.6081, error -0.006 MF2022 Eq. 10 CD(45)/CD(0) at the refit (fit data, no tolerance): N20b Snm 0.199 CD(45)/CD(0): measured 0.614, model 0.6426, error 0.029 N26b Snm 0.257 CD(45)/CD(0) MF2022 Eq. 10 CD(45)/CD(0) at the defaults (fit data, no tolerance): N26b Snm 0.257 CD(45)/CD(0): measured 0.6169, model 0.6081, error -0.009 MF2022 Eq. 10 CD(45)/CD(0) at the refit (fit data, no tolerance): N26b Snm 0.257 CD(45)/CD(0): measured 0.6169, model 0.6426, error 0.026 N33b Snm 0.328 CD(45)/CD(0) MF2022 Eq. 10 CD(45)/CD(0) at the defaults (fit data, no tolerance): N33b Snm 0.328 CD(45)/CD(0): measured 0.5979, model 0.6081, error 0.010 MF2022 Eq. 10 CD(45)/CD(0) at the refit (fit data, no tolerance): N33b Snm 0.328 CD(45)/CD(0): measured 0.5979, model 0.6426, error 0.045

Case Measured Model Error Tolerance Margin Result
N19a Snm 0.193 CD(45)/CD(0) 0.6116 0.6081 -0.003 – – reported
N26a Snm 0.262 CD(45)/CD(0) 0.6161 0.6081 -0.008 – – reported
N33a Snm 0.331 CD(45)/CD(0) 0.5969 0.6081 0.011 – – reported
N36a Snm 0.364 CD(45)/CD(0) 0.5849 0.6081 0.023 – – reported
N18b Snm 0.185 CD(45)/CD(0) 0.6074 0.6081 0.001 – – reported
N20b Snm 0.199 CD(45)/CD(0) 0.614 0.6081 -0.006 – – reported
N26b Snm 0.257 CD(45)/CD(0) 0.6169 0.6081 -0.009 – – reported
N33b Snm 0.328 CD(45)/CD(0) 0.5979 0.6081 0.01 – – reported

MF2022 Eq. 10 CD(45)/CD(0) at the refit (fit data, no tolerance)

reported; 8 rows, no tolerance.

Case Measured Model Error Tolerance Margin Result
N19a Snm 0.193 CD(45)/CD(0) 0.6116 0.6426 0.031 – – reported
N26a Snm 0.262 CD(45)/CD(0) 0.6161 0.6426 0.026 – – reported
N33a Snm 0.331 CD(45)/CD(0) 0.5969 0.6426 0.046 – – reported
N36a Snm 0.364 CD(45)/CD(0) 0.5849 0.6426 0.058 – – reported
N18b Snm 0.185 CD(45)/CD(0) 0.6074 0.6426 0.035 – – reported
N20b Snm 0.199 CD(45)/CD(0) 0.614 0.6426 0.029 – – reported
N26b Snm 0.257 CD(45)/CD(0) 0.6169 0.6426 0.026 – – reported
N33b Snm 0.328 CD(45)/CD(0) 0.5979 0.6426 0.045 – – reported