Known misfit, disclosed by owner decision (2026-09-27). The default law's two-harmonic KF2012 Eq. 14 angle form misfits MF2022 lift at high solidity (CL(45°) 26–31 % low for N33a, N36a and N33b; N33a lift 196 N against 271 N) and the angle dependence of Rudi, Løland and Zhan at 60–80° (Rudi drag ratio low by up to 0.154, lift ratio by up to 0.358; Løland C_L outside ±25 % in 31 of 80 rows; Zhan R60/R0 off by up to −0.184, speed trend up to +38.7 %). The L9 refit (a3 = 0.046, b4 = 0.050) leaves 16 of 66 L5/L8 checks failing, as the defaults do, so the form itself misfits. The owner chose to disclose this now and to replace the angle form later (0131 — Default law: replace the two-harmonic angle form with three harmonics, refitted to MF2022, Rudi, Løland and Zhan); the 11 load-law tests that fail stay DISABLED_ (0110 — Default load law misses lift at high solidity and the angle dependence of Rudi, Løland and Zhan (A6 disabled tests)), and nothing is tuned to pass them. Details: 11.4 The default law's angle form misfits lift and 60–80° (MARE-0110).

Generated 2026-10-03 from commit 87e60a3 2026-10-03; tests run 2026-10-03T09:10:34.294 (main entry) and 2026-10-03T09:11:16.576 (VALIDATION entry).

Tests

Status from the gtest XML of the last run. A DISABLED_ test fails against the current laws; its numbers are in the tables below, and it stays disabled until the owner decides the issue.

Test	Source	Status	Issues	Owner question
`PanelLoadLaw_Loland.DISABLED_L6_DragAtNormalIncidence_LocalThroughFlow`	`PanelLoadLaw_Loland_Test.cpp:118`	DISABLED	MARE-0093 (resolved), MARE-0110, MARE-0131	–
`PanelLoadLaw_Loland.DISABLED_L6_LiftCoefficient_LocalThroughFlow`	`PanelLoadLaw_Loland_Test.cpp:128`	DISABLED	MARE-0093 (resolved), MARE-0110, MARE-0131	–
`PanelLoadLaw_Loland.WritesReport`	`PanelLoadLaw_Loland_Test.cpp:133`	passed	–	–
`PanelLoadLaw_Rudi.DISABLED_L5_DragAngleDependence_LocalThroughFlow`	`PanelLoadLaw_Rudi_Test.cpp:33`	DISABLED	MARE-0093 (resolved), MARE-0110, MARE-0131	–
`PanelLoadLaw_Rudi.DISABLED_L5_LiftAngleDependence_LocalThroughFlow`	`PanelLoadLaw_Rudi_Test.cpp:42`	DISABLED	MARE-0093 (resolved), MARE-0110, MARE-0131	–
`PanelLoadLaw_Rudi.WritesReport`	`PanelLoadLaw_Rudi_Test.cpp:47`	passed	–	–

PanelLoadLaw Rudi report

tests/out/PanelLoadLaw_Rudi_report.txt, as the test wrote it.

PanelLoadLaw Rudi report (plan L5, MARE-0093). Rudi et al. 1988 via KF2012 Fig. 5.

Conventions: error = model/measured - 1 (in %) for loads and coefficients, model - measured for ratios and localCd; ratio = measured/model; margin = tolerance - |error| (negative = fails).

Readings: ratios normalised on the same net and speed, averaged over the speeds 0.159, 0.316, 0.966 m/s of the notes; nominal twine 1.0 mm, rho 1000, nu 1.0e-06 (they do not affect the ratios of LocalThroughFlow). Absolute errors.

L5 LocalThroughFlow (a3 0.07, b4 0.10), C_D(theta)/C_D(0) (DISABLED_, fails)

DISABLED test; 24 rows, 6 of 24 outside the tolerance.

Chart: L5 LocalThroughFlow (a3 0.07, b4 0.10), C_D(theta)/C_D(0) (DISABLED_, fails); L5 LocalThroughFlow with a3 = 0, b4 = 0 (first harmonics only), C_D ratio (reported); L5 ScreenMF2022 (a3 fitted per Sn, b4 0; Sn 0.130/0.144 outside Eq. 10 range), C_D ratio (reported).

Case	Measured	Model	Error	Tolerance	Margin	Result
Sn 0.130 CD( 0)/CD(0)	1	1	0	±0.08	0.08	within
Sn 0.130 CD(30)/CD(0)	0.845	0.8054	-0.04	±0.08	0.04	within
Sn 0.130 CD(45)/CD(0)	0.655	0.6081	-0.047	±0.08	0.033	within
Sn 0.130 CD(60)/CD(0)	0.483	0.395	-0.088	±0.08	-0.008	outside
Sn 0.130 CD(80)/CD(0)	0.276	0.1265	-0.15	±0.08	-0.07	outside
Sn 0.130 CD(90)/CD(0)	0	4.409e-17	0	±0.08	0.08	within
Sn 0.144 CD( 0)/CD(0)	1	1	0	±0.08	0.08	within
Sn 0.144 CD(30)/CD(0)	0.778	0.8054	0.027	±0.08	0.053	within
Sn 0.144 CD(45)/CD(0)	0.635	0.6081	-0.027	±0.08	0.053	within
Sn 0.144 CD(60)/CD(0)	0.492	0.395	-0.097	±0.08	-0.017	outside
Sn 0.144 CD(80)/CD(0)	0.238	0.1265	-0.112	±0.08	-0.032	outside
Sn 0.144 CD(90)/CD(0)	0.032	4.409e-17	-0.032	±0.08	0.048	within
Sn 0.184 CD( 0)/CD(0)	1	1	0	±0.08	0.08	within
Sn 0.184 CD(30)/CD(0)	0.736	0.8054	0.069	±0.08	0.011	within
Sn 0.184 CD(45)/CD(0)	0.626	0.6081	-0.018	±0.08	0.062	within
Sn 0.184 CD(60)/CD(0)	0.549	0.395	-0.154	±0.08	-0.074	outside
Sn 0.184 CD(80)/CD(0)	0.231	0.1265	-0.105	±0.08	-0.025	outside
Sn 0.184 CD(90)/CD(0)	0.011	4.409e-17	-0.011	±0.08	0.069	within
Sn 0.317 CD( 0)/CD(0)	1	1	0	±0.08	0.08	within
Sn 0.317 CD(30)/CD(0)	0.792	0.8054	0.013	±0.08	0.067	within
Sn 0.317 CD(45)/CD(0)	0.575	0.6081	0.033	±0.08	0.047	within
Sn 0.317 CD(60)/CD(0)	0.389	0.395	0.006	±0.08	0.074	within
Sn 0.317 CD(80)/CD(0)	0.131	0.1265	-0.005	±0.08	0.075	within
Sn 0.317 CD(90)/CD(0)	0.023	4.409e-17	-0.023	±0.08	0.057	within

L5 LocalThroughFlow (a3 0.07, b4 0.10), C_L(theta)/C_L(45) (DISABLED_, fails)

DISABLED test; 24 rows, 5 of 24 outside the tolerance.

Chart: L5 LocalThroughFlow (a3 0.07, b4 0.10), C_L(theta)/C_L(45) (DISABLED_, fails); L5 LocalThroughFlow with a3 = 0, b4 = 0 (first harmonics only), C_L ratio (reported).

Case	Measured	Model	Error	Tolerance	Margin	Result
Sn 0.130 CL( 0)/CL(45)	0	0	0	±0.08	0.08	within
Sn 0.130 CL(30)/CL(45)	1	0.9526	-0.047	±0.08	0.033	within
Sn 0.130 CL(45)/CL(45)	1	1	0	±0.08	0.08	within
Sn 0.130 CL(60)/CL(45)	0.909	0.7794	-0.13	±0.08	-0.05	outside
Sn 0.130 CL(80)/CL(45)	0.455	0.2777	-0.177	±0.08	-0.097	outside
Sn 0.130 CL(90)/CL(45)	0	9.797e-17	0	±0.08	0.08	within
Sn 0.144 CL( 0)/CL(45)	0	0	0	±0.08	0.08	within
Sn 0.144 CL(30)/CL(45)	1.091	0.9526	-0.138	±0.08	-0.058	outside
Sn 0.144 CL(45)/CL(45)	1	1	0	±0.08	0.08	within
Sn 0.144 CL(60)/CL(45)	0.909	0.7794	-0.13	±0.08	-0.05	outside
Sn 0.144 CL(80)/CL(45)	0.636	0.2777	-0.358	±0.08	-0.278	outside
Sn 0.144 CL(90)/CL(45)	0	9.797e-17	0	±0.08	0.08	within
Sn 0.184 CL( 0)/CL(45)	0	0	0	±0.08	0.08	within
Sn 0.184 CL(30)/CL(45)	1	0.9526	-0.047	±0.08	0.033	within
Sn 0.184 CL(45)/CL(45)	1	1	0	±0.08	0.08	within
Sn 0.184 CL(60)/CL(45)	0.8	0.7794	-0.021	±0.08	0.059	within
Sn 0.184 CL(80)/CL(45)	0.35	0.2777	-0.072	±0.08	0.008	within
Sn 0.184 CL(90)/CL(45)	0	9.797e-17	0	±0.08	0.08	within
Sn 0.317 CL( 0)/CL(45)	0	0	0	±0.08	0.08	within
Sn 0.317 CL(30)/CL(45)	1.019	0.9526	-0.066	±0.08	0.014	within
Sn 0.317 CL(45)/CL(45)	1	1	0	±0.08	0.08	within
Sn 0.317 CL(60)/CL(45)	0.769	0.7794	0.01	±0.08	0.07	within
Sn 0.317 CL(80)/CL(45)	0.308	0.2777	-0.03	±0.08	0.05	within
Sn 0.317 CL(90)/CL(45)	0	9.797e-17	0	±0.08	0.08	within

L5 LocalThroughFlow with a3 = 0, b4 = 0 (first harmonics only), C_D ratio (reported)

reported; 24 rows, 6 of 24 outside the tolerance.

Case	Measured	Model	Error	Tolerance	Margin	Result
Sn 0.130 CD( 0)/CD(0)	1	1	0	±0.08	0.08	within
Sn 0.130 CD(30)/CD(0)	0.845	0.866	0.021	±0.08	0.059	within
Sn 0.130 CD(45)/CD(0)	0.655	0.7071	0.052	±0.08	0.028	within
Sn 0.130 CD(60)/CD(0)	0.483	0.5	0.017	±0.08	0.063	within
Sn 0.130 CD(80)/CD(0)	0.276	0.1736	-0.102	±0.08	-0.022	outside
Sn 0.130 CD(90)/CD(0)	0	6.123e-17	0	±0.08	0.08	within
Sn 0.144 CD( 0)/CD(0)	1	1	0	±0.08	0.08	within
Sn 0.144 CD(30)/CD(0)	0.778	0.866	0.088	±0.08	-0.008	outside
Sn 0.144 CD(45)/CD(0)	0.635	0.7071	0.072	±0.08	0.008	within
Sn 0.144 CD(60)/CD(0)	0.492	0.5	0.008	±0.08	0.072	within
Sn 0.144 CD(80)/CD(0)	0.238	0.1736	-0.064	±0.08	0.016	within
Sn 0.144 CD(90)/CD(0)	0.032	6.123e-17	-0.032	±0.08	0.048	within
Sn 0.184 CD( 0)/CD(0)	1	1	0	±0.08	0.08	within
Sn 0.184 CD(30)/CD(0)	0.736	0.866	0.13	±0.08	-0.05	outside
Sn 0.184 CD(45)/CD(0)	0.626	0.7071	0.081	±0.08	-0.001	outside
Sn 0.184 CD(60)/CD(0)	0.549	0.5	-0.049	±0.08	0.031	within
Sn 0.184 CD(80)/CD(0)	0.231	0.1736	-0.057	±0.08	0.023	within
Sn 0.184 CD(90)/CD(0)	0.011	6.123e-17	-0.011	±0.08	0.069	within
Sn 0.317 CD( 0)/CD(0)	1	1	0	±0.08	0.08	within
Sn 0.317 CD(30)/CD(0)	0.792	0.866	0.074	±0.08	0.006	within
Sn 0.317 CD(45)/CD(0)	0.575	0.7071	0.132	±0.08	-0.052	outside
Sn 0.317 CD(60)/CD(0)	0.389	0.5	0.111	±0.08	-0.031	outside
Sn 0.317 CD(80)/CD(0)	0.131	0.1736	0.043	±0.08	0.037	within
Sn 0.317 CD(90)/CD(0)	0.023	6.123e-17	-0.023	±0.08	0.057	within

L5 LocalThroughFlow with a3 = 0, b4 = 0 (first harmonics only), C_L ratio (reported)

reported; 24 rows, 7 of 24 outside the tolerance.

Case	Measured	Model	Error	Tolerance	Margin	Result
Sn 0.130 CL( 0)/CL(45)	0	0	0	±0.08	0.08	within
Sn 0.130 CL(30)/CL(45)	1	0.866	-0.134	±0.08	-0.054	outside
Sn 0.130 CL(45)/CL(45)	1	1	0	±0.08	0.08	within
Sn 0.130 CL(60)/CL(45)	0.909	0.866	-0.043	±0.08	0.037	within
Sn 0.130 CL(80)/CL(45)	0.455	0.342	-0.113	±0.08	-0.033	outside
Sn 0.130 CL(90)/CL(45)	0	1.225e-16	0	±0.08	0.08	within
Sn 0.144 CL( 0)/CL(45)	0	0	0	±0.08	0.08	within
Sn 0.144 CL(30)/CL(45)	1.091	0.866	-0.225	±0.08	-0.145	outside
Sn 0.144 CL(45)/CL(45)	1	1	0	±0.08	0.08	within
Sn 0.144 CL(60)/CL(45)	0.909	0.866	-0.043	±0.08	0.037	within
Sn 0.144 CL(80)/CL(45)	0.636	0.342	-0.294	±0.08	-0.214	outside
Sn 0.144 CL(90)/CL(45)	0	1.225e-16	0	±0.08	0.08	within
Sn 0.184 CL( 0)/CL(45)	0	0	0	±0.08	0.08	within
Sn 0.184 CL(30)/CL(45)	1	0.866	-0.134	±0.08	-0.054	outside
Sn 0.184 CL(45)/CL(45)	1	1	0	±0.08	0.08	within
Sn 0.184 CL(60)/CL(45)	0.8	0.866	0.066	±0.08	0.014	within
Sn 0.184 CL(80)/CL(45)	0.35	0.342	-0.008	±0.08	0.072	within
Sn 0.184 CL(90)/CL(45)	0	1.225e-16	0	±0.08	0.08	within
Sn 0.317 CL( 0)/CL(45)	0	0	0	±0.08	0.08	within
Sn 0.317 CL(30)/CL(45)	1.019	0.866	-0.153	±0.08	-0.073	outside
Sn 0.317 CL(45)/CL(45)	1	1	0	±0.08	0.08	within
Sn 0.317 CL(60)/CL(45)	0.769	0.866	0.097	±0.08	-0.017	outside
Sn 0.317 CL(80)/CL(45)	0.308	0.342	0.034	±0.08	0.046	within
Sn 0.317 CL(90)/CL(45)	0	1.225e-16	0	±0.08	0.08	within

L5 ScreenMF2022 (a3 fitted per Sn, b4 0; Sn 0.130/0.144 outside Eq. 10 range), C_D ratio (reported)

reported; 24 rows, 8 of 24 outside the tolerance.

Case	Measured	Model	Error	Tolerance	Margin	Result
Sn 0.130 CD( 0)/CD(0)	1	1	0	±0.08	0.08	within
Sn 0.130 CD(30)/CD(0)	0.845	0.7514	-0.094	±0.08	-0.014	outside
Sn 0.130 CD(45)/CD(0)	0.655	0.52	-0.135	±0.08	-0.055	outside
Sn 0.130 CD(60)/CD(0)	0.483	0.3015	-0.181	±0.08	-0.101	outside
Sn 0.130 CD(80)/CD(0)	0.276	0.08451	-0.191	±0.08	-0.111	outside
Sn 0.130 CD(90)/CD(0)	0	2.882e-17	0	±0.08	0.08	within
Sn 0.144 CD( 0)/CD(0)	1	1	0	±0.08	0.08	within
Sn 0.144 CD(30)/CD(0)	0.778	0.7742	-0.004	±0.08	0.076	within
Sn 0.144 CD(45)/CD(0)	0.635	0.5571	-0.078	±0.08	0.002	within
Sn 0.144 CD(60)/CD(0)	0.492	0.3409	-0.151	±0.08	-0.071	outside
Sn 0.144 CD(80)/CD(0)	0.238	0.1022	-0.136	±0.08	-0.056	outside
Sn 0.144 CD(90)/CD(0)	0.032	3.526e-17	-0.032	±0.08	0.048	within
Sn 0.184 CD( 0)/CD(0)	1	1	0	±0.08	0.08	within
Sn 0.184 CD(30)/CD(0)	0.736	0.8046	0.069	±0.08	0.011	within
Sn 0.184 CD(45)/CD(0)	0.626	0.6068	-0.019	±0.08	0.061	within
Sn 0.184 CD(60)/CD(0)	0.549	0.3936	-0.155	±0.08	-0.075	outside
Sn 0.184 CD(80)/CD(0)	0.231	0.1259	-0.105	±0.08	-0.025	outside
Sn 0.184 CD(90)/CD(0)	0.011	4.386e-17	-0.011	±0.08	0.069	within
Sn 0.317 CD( 0)/CD(0)	1	1	0	±0.08	0.08	within
Sn 0.317 CD(30)/CD(0)	0.792	0.8014	0.009	±0.08	0.071	within
Sn 0.317 CD(45)/CD(0)	0.575	0.6016	0.027	±0.08	0.053	within
Sn 0.317 CD(60)/CD(0)	0.389	0.3881	-0.001	±0.08	0.079	within
Sn 0.317 CD(80)/CD(0)	0.131	0.1234	-0.008	±0.08	0.072	within
Sn 0.317 CD(90)/CD(0)	0.023	4.295e-17	-0.023	±0.08	0.057	within

L5 ScreenMF2022, C_L ratio (reported)

reported; 24 rows, 7 of 24 outside the tolerance.

Case	Measured	Model	Error	Tolerance	Margin	Result
Sn 0.130 CL( 0)/CL(45)	0	0	0	±0.08	0.08	within
Sn 0.130 CL(30)/CL(45)	1	0.866	-0.134	±0.08	-0.054	outside
Sn 0.130 CL(45)/CL(45)	1	1	0	±0.08	0.08	within
Sn 0.130 CL(60)/CL(45)	0.909	0.866	-0.043	±0.08	0.037	within
Sn 0.130 CL(80)/CL(45)	0.455	0.342	-0.113	±0.08	-0.033	outside
Sn 0.130 CL(90)/CL(45)	0	1.225e-16	0	±0.08	0.08	within
Sn 0.144 CL( 0)/CL(45)	0	0	0	±0.08	0.08	within
Sn 0.144 CL(30)/CL(45)	1.091	0.866	-0.225	±0.08	-0.145	outside
Sn 0.144 CL(45)/CL(45)	1	1	0	±0.08	0.08	within
Sn 0.144 CL(60)/CL(45)	0.909	0.866	-0.043	±0.08	0.037	within
Sn 0.144 CL(80)/CL(45)	0.636	0.342	-0.294	±0.08	-0.214	outside
Sn 0.144 CL(90)/CL(45)	0	1.225e-16	0	±0.08	0.08	within
Sn 0.184 CL( 0)/CL(45)	0	0	0	±0.08	0.08	within
Sn 0.184 CL(30)/CL(45)	1	0.866	-0.134	±0.08	-0.054	outside
Sn 0.184 CL(45)/CL(45)	1	1	0	±0.08	0.08	within
Sn 0.184 CL(60)/CL(45)	0.8	0.866	0.066	±0.08	0.014	within
Sn 0.184 CL(80)/CL(45)	0.35	0.342	-0.008	±0.08	0.072	within
Sn 0.184 CL(90)/CL(45)	0	1.225e-16	0	±0.08	0.08	within
Sn 0.317 CL( 0)/CL(45)	0	0	0	±0.08	0.08	within
Sn 0.317 CL(30)/CL(45)	1.019	0.866	-0.153	±0.08	-0.073	outside
Sn 0.317 CL(45)/CL(45)	1	1	0	±0.08	0.08	within
Sn 0.317 CL(60)/CL(45)	0.769	0.866	0.097	±0.08	-0.017	outside
Sn 0.317 CL(80)/CL(45)	0.308	0.342	0.034	±0.08	0.046	within
Sn 0.317 CL(90)/CL(45)	0	1.225e-16	0	±0.08	0.08	within

PanelLoadLaw Loland report

tests/out/PanelLoadLaw_Loland_report.txt, as the test wrote it.

PanelLoadLaw Loland report (plan L6, MARE-0093). Loland 1991 via KF2012 Eq. 4.

Conventions: error = model/measured - 1 (in %) for loads and coefficients, model - measured for ratios and localCd; ratio = measured/model; margin = tolerance - |error| (negative = fails).

Readings: Re = U d / (nu (1 - Sn)) (KF2012 Eq. 11, free stream) in {500, 1000, 2000, 5000, 10000}; nominal d 1.0 mm, rho 1000, nu 1.0e-06; Sn = K x Loland Sn. Asserted: K = 1, induction on, +-25 % (plan table). The plan text's +-20 % spread is shown as a second margin table.

L6 ScreenKF2012 a3 0.07 b4 0.10, induction on (default law), K = 1, C_D(0), tolerance 25 %

20 rows, 1 of 20 outside the tolerance.

Chart: L6 ScreenKF2012 a3 0.07 b4 0.10, induction on (default law), K = 1, C_D(0), tolerance 25 %; L6 ScreenKF2012 a3 0.07 b4 0.10, induction off, K = 1, C_D(0), tolerance 25 %; L6 ScreenKF2012 a3 0.07 b4 0.10, induction on, K = 1.16, C_D(0), tolerance 25 %; L6 ScreenKF2012 a3 0.07 b4 0.10, induction off, K = 1.16, C_D(0), tolerance 25 %.

Case	Measured	Model	Error	Tolerance	Margin	Result
Sn 0.130 Re 500 CD( 0)	0.1427	0.1775	24.355 %	±25.000 %	0.645 %	within
Sn 0.130 Re 1000 CD( 0)	0.1427	0.1547	8.400 %	±25.000 %	16.600 %	within
Sn 0.130 Re 2000 CD( 0)	0.1427	0.1452	1.730 %	±25.000 %	23.270 %	within
Sn 0.130 Re 5000 CD( 0)	0.1427	0.1585	11.096 %	±25.000 %	13.904 %	within
Sn 0.130 Re 10000 CD( 0)	0.1427	0.1672	17.185 %	±25.000 %	7.815 %	within
Sn 0.144 Re 500 CD( 0)	0.1686	0.199	18.063 %	±25.000 %	6.937 %	within
Sn 0.144 Re 1000 CD( 0)	0.1686	0.1735	2.902 %	±25.000 %	22.098 %	within
Sn 0.144 Re 2000 CD( 0)	0.1686	0.1626	-3.550 %	±25.000 %	21.450 %	within
Sn 0.144 Re 5000 CD( 0)	0.1686	0.1774	5.241 %	±25.000 %	19.759 %	within
Sn 0.144 Re 10000 CD( 0)	0.1686	0.1872	11.086 %	±25.000 %	13.914 %	within
Sn 0.184 Re 500 CD( 0)	0.2517	0.264	4.861 %	±25.000 %	20.139 %	within
Sn 0.184 Re 1000 CD( 0)	0.2517	0.23	-8.631 %	±25.000 %	16.369 %	within
Sn 0.184 Re 2000 CD( 0)	0.2517	0.2148	-14.668 %	±25.000 %	10.332 %	within
Sn 0.184 Re 5000 CD( 0)	0.2517	0.2338	-7.124 %	±25.000 %	17.876 %	within
Sn 0.184 Re 10000 CD( 0)	0.2517	0.2473	-1.770 %	±25.000 %	23.230 %	within
Sn 0.317 Re 500 CD( 0)	0.6064	0.5296	-12.654 %	±25.000 %	12.346 %	within
Sn 0.317 Re 1000 CD( 0)	0.6064	0.4614	-23.909 %	±25.000 %	1.091 %	within
Sn 0.317 Re 2000 CD( 0)	0.6064	0.4257	-29.786 %	±25.000 %	-4.786 %	outside
Sn 0.317 Re 5000 CD( 0)	0.6064	0.4588	-24.333 %	±25.000 %	0.667 %	within
Sn 0.317 Re 10000 CD( 0)	0.6064	0.4886	-19.425 %	±25.000 %	5.575 %	within

L6 ScreenKF2012 a3 0.07 b4 0.10, induction on (default law), K = 1, C_L(theta), tolerance 25 %

80 rows, 31 of 80 outside the tolerance.

Chart: L6 ScreenKF2012 a3 0.07 b4 0.10, induction on (default law), K = 1, C_L(theta), tolerance 25 %; L6 ScreenKF2012 a3 0.07 b4 0.10, induction off, K = 1, C_L(theta), tolerance 25 %; L6 ScreenKF2012 a3 0.07 b4 0.10, induction on, K = 1.16, C_L(theta), tolerance 25 %; L6 ScreenKF2012 a3 0.07 b4 0.10, induction off, K = 1.16, C_L(theta), tolerance 25 %.

Case	Measured	Model	Error	Tolerance	Margin	Result
Sn 0.130 Re 500 CL(30)	0.02468	0.03657	48.140 %	±25.000 %	-23.140 %	outside
Sn 0.130 Re 500 CL(45)	0.0285	0.03839	34.673 %	±25.000 %	-9.673 %	outside
Sn 0.130 Re 500 CL(60)	0.02468	0.02992	21.205 %	±25.000 %	3.795 %	within
Sn 0.130 Re 500 CL(80)	0.009749	0.01066	9.362 %	±25.000 %	15.638 %	within
Sn 0.130 Re 1000 CL(30)	0.02468	0.03185	29.012 %	±25.000 %	-4.012 %	outside
Sn 0.130 Re 1000 CL(45)	0.0285	0.03343	17.284 %	±25.000 %	7.716 %	within
Sn 0.130 Re 1000 CL(60)	0.02468	0.02606	5.556 %	±25.000 %	19.444 %	within
Sn 0.130 Re 1000 CL(80)	0.009749	0.009285	-4.758 %	±25.000 %	20.242 %	within
Sn 0.130 Re 2000 CL(30)	0.02468	0.02987	21.027 %	±25.000 %	3.973 %	within
Sn 0.130 Re 2000 CL(45)	0.0285	0.03136	10.024 %	±25.000 %	14.976 %	within
Sn 0.130 Re 2000 CL(60)	0.02468	0.02444	-0.978 %	±25.000 %	24.022 %	within
Sn 0.130 Re 2000 CL(80)	0.009749	0.00871	-10.654 %	±25.000 %	14.346 %	within
Sn 0.130 Re 5000 CL(30)	0.02468	0.03264	32.242 %	±25.000 %	-7.242 %	outside
Sn 0.130 Re 5000 CL(45)	0.0285	0.03427	20.220 %	±25.000 %	4.780 %	within
Sn 0.130 Re 5000 CL(60)	0.02468	0.02671	8.198 %	±25.000 %	16.802 %	within
Sn 0.130 Re 5000 CL(80)	0.009749	0.009517	-2.374 %	±25.000 %	22.626 %	within
Sn 0.130 Re 10000 CL(30)	0.02468	0.03444	39.539 %	±25.000 %	-14.539 %	outside
Sn 0.130 Re 10000 CL(45)	0.0285	0.03616	26.854 %	±25.000 %	-1.854 %	outside
Sn 0.130 Re 10000 CL(60)	0.02468	0.02818	14.169 %	±25.000 %	10.831 %	within
Sn 0.130 Re 10000 CL(80)	0.009749	0.01004	3.013 %	±25.000 %	21.987 %	within
Sn 0.144 Re 500 CL(30)	0.03052	0.04105	34.513 %	±25.000 %	-9.513 %	outside
Sn 0.144 Re 500 CL(45)	0.03524	0.04309	22.285 %	±25.000 %	2.715 %	within
Sn 0.144 Re 500 CL(60)	0.03052	0.03359	10.056 %	±25.000 %	14.944 %	within
Sn 0.144 Re 500 CL(80)	0.01205	0.01197	-0.697 %	±25.000 %	24.303 %	within
Sn 0.144 Re 1000 CL(30)	0.03052	0.03574	17.116 %	±25.000 %	7.884 %	within
Sn 0.144 Re 1000 CL(45)	0.03524	0.03752	6.469 %	±25.000 %	18.531 %	within
Sn 0.144 Re 1000 CL(60)	0.03052	0.02924	-4.178 %	±25.000 %	20.822 %	within
Sn 0.144 Re 1000 CL(80)	0.01205	0.01042	-13.540 %	±25.000 %	11.460 %	within
Sn 0.144 Re 2000 CL(30)	0.03052	0.03348	9.723 %	±25.000 %	15.277 %	within
Sn 0.144 Re 2000 CL(45)	0.03524	0.03515	-0.252 %	±25.000 %	24.748 %	within
Sn 0.144 Re 2000 CL(60)	0.03052	0.0274	-10.227 %	±25.000 %	14.773 %	within
Sn 0.144 Re 2000 CL(80)	0.01205	0.009762	-18.999 %	±25.000 %	6.001 %	within
Sn 0.144 Re 5000 CL(30)	0.03052	0.03656	19.798 %	±25.000 %	5.202 %	within
Sn 0.144 Re 5000 CL(45)	0.03524	0.03838	8.907 %	±25.000 %	16.093 %	within
Sn 0.144 Re 5000 CL(60)	0.03052	0.02991	-1.983 %	±25.000 %	23.017 %	within
Sn 0.144 Re 5000 CL(80)	0.01205	0.01066	-11.561 %	±25.000 %	13.439 %	within
Sn 0.144 Re 10000 CL(30)	0.03052	0.0386	26.503 %	±25.000 %	-1.503 %	outside
Sn 0.144 Re 10000 CL(45)	0.03524	0.04052	15.003 %	±25.000 %	9.997 %	within
Sn 0.144 Re 10000 CL(60)	0.03052	0.03159	3.502 %	±25.000 %	21.498 %	within
Sn 0.144 Re 10000 CL(80)	0.01205	0.01126	-6.611 %	±25.000 %	18.389 %	within
Sn 0.184 Re 500 CL(30)	0.04997	0.05462	9.296 %	±25.000 %	15.704 %	within
Sn 0.184 Re 500 CL(45)	0.0577	0.05734	-0.640 %	±25.000 %	24.360 %	within
Sn 0.184 Re 500 CL(60)	0.04997	0.04469	-10.576 %	±25.000 %	14.424 %	within
Sn 0.184 Re 500 CL(80)	0.01974	0.01592	-19.313 %	±25.000 %	5.687 %	within
Sn 0.184 Re 1000 CL(30)	0.04997	0.04752	-4.904 %	±25.000 %	20.096 %	within
Sn 0.184 Re 1000 CL(45)	0.0577	0.04989	-13.549 %	±25.000 %	11.451 %	within
Sn 0.184 Re 1000 CL(60)	0.04997	0.03888	-22.194 %	±25.000 %	2.806 %	within
Sn 0.184 Re 1000 CL(80)	0.01974	0.01386	-29.797 %	±25.000 %	-4.797 %	outside
Sn 0.184 Re 2000 CL(30)	0.04997	0.04435	-11.245 %	±25.000 %	13.755 %	within
Sn 0.184 Re 2000 CL(45)	0.0577	0.04656	-19.314 %	±25.000 %	5.686 %	within
Sn 0.184 Re 2000 CL(60)	0.04997	0.03629	-27.382 %	±25.000 %	-2.382 %	outside
Sn 0.184 Re 2000 CL(80)	0.01974	0.01293	-34.478 %	±25.000 %	-9.478 %	outside
Sn 0.184 Re 5000 CL(30)	0.04997	0.04831	-3.320 %	±25.000 %	21.680 %	within
Sn 0.184 Re 5000 CL(45)	0.0577	0.05072	-12.109 %	±25.000 %	12.891 %	within
Sn 0.184 Re 5000 CL(60)	0.04997	0.03953	-20.898 %	±25.000 %	4.102 %	within
Sn 0.184 Re 5000 CL(80)	0.01974	0.01409	-28.627 %	±25.000 %	-3.627 %	outside
Sn 0.184 Re 10000 CL(30)	0.04997	0.05113	2.312 %	±25.000 %	22.688 %	within
Sn 0.184 Re 10000 CL(45)	0.0577	0.05367	-6.989 %	±25.000 %	18.011 %	within
Sn 0.184 Re 10000 CL(60)	0.04997	0.04183	-16.290 %	±25.000 %	8.710 %	within
Sn 0.184 Re 10000 CL(80)	0.01974	0.01491	-24.469 %	±25.000 %	0.531 %	within
Sn 0.317 Re 500 CL(30)	0.1379	0.1112	-19.376 %	±25.000 %	5.624 %	within
Sn 0.317 Re 500 CL(45)	0.1592	0.1167	-26.706 %	±25.000 %	-1.706 %	outside
Sn 0.317 Re 500 CL(60)	0.1379	0.09095	-34.035 %	±25.000 %	-9.035 %	outside
Sn 0.317 Re 500 CL(80)	0.05445	0.03241	-40.481 %	±25.000 %	-15.481 %	outside
Sn 0.317 Re 1000 CL(30)	0.1379	0.09653	-29.988 %	±25.000 %	-4.988 %	outside
Sn 0.317 Re 1000 CL(45)	0.1592	0.1013	-36.352 %	±25.000 %	-11.352 %	outside
Sn 0.317 Re 1000 CL(60)	0.1379	0.07898	-42.717 %	±25.000 %	-17.717 %	outside
Sn 0.317 Re 1000 CL(80)	0.05445	0.02814	-48.314 %	±25.000 %	-23.314 %	outside
Sn 0.317 Re 2000 CL(30)	0.1379	0.08893	-35.503 %	±25.000 %	-10.503 %	outside
Sn 0.317 Re 2000 CL(45)	0.1592	0.09335	-41.366 %	±25.000 %	-16.366 %	outside
Sn 0.317 Re 2000 CL(60)	0.1379	0.07276	-47.229 %	±25.000 %	-22.229 %	outside
Sn 0.317 Re 2000 CL(80)	0.05445	0.02593	-52.386 %	±25.000 %	-27.386 %	outside
Sn 0.317 Re 5000 CL(30)	0.1379	0.09598	-30.386 %	±25.000 %	-5.386 %	outside
Sn 0.317 Re 5000 CL(45)	0.1592	0.1008	-36.714 %	±25.000 %	-11.714 %	outside
Sn 0.317 Re 5000 CL(60)	0.1379	0.07853	-43.043 %	±25.000 %	-18.043 %	outside
Sn 0.317 Re 5000 CL(80)	0.05445	0.02798	-48.608 %	±25.000 %	-23.608 %	outside
Sn 0.317 Re 10000 CL(30)	0.1379	0.1024	-25.768 %	±25.000 %	-0.768 %	outside
Sn 0.317 Re 10000 CL(45)	0.1592	0.1074	-32.516 %	±25.000 %	-7.516 %	outside
Sn 0.317 Re 10000 CL(60)	0.1379	0.08374	-39.265 %	±25.000 %	-14.265 %	outside
Sn 0.317 Re 10000 CL(80)	0.05445	0.02984	-45.199 %	±25.000 %	-20.199 %	outside

L6 ScreenKF2012 a3 0.07 b4 0.10, induction off, K = 1, C_D(0), tolerance 25 %

20 rows, 1 of 20 outside the tolerance.

Case	Measured	Model	Error	Tolerance	Margin	Result
Sn 0.130 Re 500 CD( 0)	0.1427	0.1851	29.706 %	±25.000 %	-4.706 %	outside
Sn 0.130 Re 1000 CD( 0)	0.1427	0.1614	13.121 %	±25.000 %	11.879 %	within
Sn 0.130 Re 2000 CD( 0)	0.1427	0.1521	6.612 %	±25.000 %	18.388 %	within
Sn 0.130 Re 5000 CD( 0)	0.1427	0.1666	16.738 %	±25.000 %	8.262 %	within
Sn 0.130 Re 10000 CD( 0)	0.1427	0.1753	22.851 %	±25.000 %	2.149 %	within
Sn 0.144 Re 500 CD( 0)	0.1686	0.2102	24.705 %	±25.000 %	0.295 %	within
Sn 0.144 Re 1000 CD( 0)	0.1686	0.1833	8.760 %	±25.000 %	16.240 %	within
Sn 0.144 Re 2000 CD( 0)	0.1686	0.1728	2.501 %	±25.000 %	22.499 %	within
Sn 0.144 Re 5000 CD( 0)	0.1686	0.1892	12.237 %	±25.000 %	12.763 %	within
Sn 0.144 Re 10000 CD( 0)	0.1686	0.1991	18.114 %	±25.000 %	6.886 %	within
Sn 0.184 Re 500 CD( 0)	0.2517	0.2892	14.883 %	±25.000 %	10.117 %	within
Sn 0.184 Re 1000 CD( 0)	0.2517	0.2522	0.194 %	±25.000 %	24.806 %	within
Sn 0.184 Re 2000 CD( 0)	0.2517	0.2377	-5.572 %	±25.000 %	19.428 %	within
Sn 0.184 Re 5000 CD( 0)	0.2517	0.2603	3.397 %	±25.000 %	21.603 %	within
Sn 0.184 Re 10000 CD( 0)	0.2517	0.2739	8.811 %	±25.000 %	16.189 %	within
Sn 0.317 Re 500 CD( 0)	0.6064	0.6591	8.699 %	±25.000 %	16.301 %	within
Sn 0.317 Re 1000 CD( 0)	0.6064	0.5748	-5.200 %	±25.000 %	19.800 %	within
Sn 0.317 Re 2000 CD( 0)	0.6064	0.5417	-10.655 %	±25.000 %	14.345 %	within
Sn 0.317 Re 5000 CD( 0)	0.6064	0.5932	-2.169 %	±25.000 %	22.831 %	within
Sn 0.317 Re 10000 CD( 0)	0.6064	0.6243	2.954 %	±25.000 %	22.046 %	within

L6 ScreenKF2012 a3 0.07 b4 0.10, induction off, K = 1, C_L(theta), tolerance 25 %

80 rows, 23 of 80 outside the tolerance.

Case	Measured	Model	Error	Tolerance	Margin	Result
Sn 0.130 Re 500 CL(30)	0.02468	0.03814	54.509 %	±25.000 %	-29.509 %	outside
Sn 0.130 Re 500 CL(45)	0.0285	0.04004	40.463 %	±25.000 %	-15.463 %	outside
Sn 0.130 Re 500 CL(60)	0.02468	0.03121	26.416 %	±25.000 %	-1.416 %	outside
Sn 0.130 Re 500 CL(80)	0.009749	0.01112	14.064 %	±25.000 %	10.936 %	within
Sn 0.130 Re 1000 CL(30)	0.02468	0.03323	34.628 %	±25.000 %	-9.628 %	outside
Sn 0.130 Re 1000 CL(45)	0.0285	0.03488	22.389 %	±25.000 %	2.611 %	within
Sn 0.130 Re 1000 CL(60)	0.02468	0.02719	10.150 %	±25.000 %	14.850 %	within
Sn 0.130 Re 1000 CL(80)	0.009749	0.009689	-0.613 %	±25.000 %	24.387 %	within
Sn 0.130 Re 2000 CL(30)	0.02468	0.03131	26.834 %	±25.000 %	-1.834 %	outside
Sn 0.130 Re 2000 CL(45)	0.0285	0.03287	15.304 %	±25.000 %	9.696 %	within
Sn 0.130 Re 2000 CL(60)	0.02468	0.02562	3.774 %	±25.000 %	21.226 %	within
Sn 0.130 Re 2000 CL(80)	0.009749	0.009128	-6.366 %	±25.000 %	18.634 %	within
Sn 0.130 Re 5000 CL(30)	0.02468	0.0343	38.960 %	±25.000 %	-13.960 %	outside
Sn 0.130 Re 5000 CL(45)	0.0285	0.03601	26.327 %	±25.000 %	-1.327 %	outside
Sn 0.130 Re 5000 CL(60)	0.02468	0.02807	13.695 %	±25.000 %	11.305 %	within
Sn 0.130 Re 5000 CL(80)	0.009749	0.01	2.586 %	±25.000 %	22.414 %	within
Sn 0.130 Re 10000 CL(30)	0.02468	0.03611	46.287 %	±25.000 %	-21.287 %	outside
Sn 0.130 Re 10000 CL(45)	0.0285	0.03791	32.988 %	±25.000 %	-7.988 %	outside
Sn 0.130 Re 10000 CL(60)	0.02468	0.02954	19.689 %	±25.000 %	5.311 %	within
Sn 0.130 Re 10000 CL(80)	0.009749	0.01053	7.995 %	±25.000 %	17.005 %	within
Sn 0.144 Re 500 CL(30)	0.03052	0.04336	42.075 %	±25.000 %	-17.075 %	outside
Sn 0.144 Re 500 CL(45)	0.03524	0.04551	29.159 %	±25.000 %	-4.159 %	outside
Sn 0.144 Re 500 CL(60)	0.03052	0.03547	16.243 %	±25.000 %	8.757 %	within
Sn 0.144 Re 500 CL(80)	0.01205	0.01264	4.885 %	±25.000 %	20.115 %	within
Sn 0.144 Re 1000 CL(30)	0.03052	0.03777	23.778 %	±25.000 %	1.222 %	within
Sn 0.144 Re 1000 CL(45)	0.03524	0.03965	12.526 %	±25.000 %	12.474 %	within
Sn 0.144 Re 1000 CL(60)	0.03052	0.03091	1.273 %	±25.000 %	23.727 %	within
Sn 0.144 Re 1000 CL(80)	0.01205	0.01101	-8.622 %	±25.000 %	16.378 %	within
Sn 0.144 Re 2000 CL(30)	0.03052	0.03558	16.607 %	±25.000 %	8.393 %	within
Sn 0.144 Re 2000 CL(45)	0.03524	0.03735	6.007 %	±25.000 %	18.993 %	within
Sn 0.144 Re 2000 CL(60)	0.03052	0.02911	-4.594 %	±25.000 %	20.406 %	within
Sn 0.144 Re 2000 CL(80)	0.01205	0.01037	-13.916 %	±25.000 %	11.084 %	within
Sn 0.144 Re 5000 CL(30)	0.03052	0.03899	27.765 %	±25.000 %	-2.765 %	outside
Sn 0.144 Re 5000 CL(45)	0.03524	0.04093	16.150 %	±25.000 %	8.850 %	within
Sn 0.144 Re 5000 CL(60)	0.03052	0.0319	4.535 %	±25.000 %	20.465 %	within
Sn 0.144 Re 5000 CL(80)	0.01205	0.01137	-5.679 %	±25.000 %	19.321 %	within
Sn 0.144 Re 10000 CL(30)	0.03052	0.04105	34.508 %	±25.000 %	-9.508 %	outside
Sn 0.144 Re 10000 CL(45)	0.03524	0.04309	22.280 %	±25.000 %	2.720 %	within
Sn 0.144 Re 10000 CL(60)	0.03052	0.03358	10.052 %	±25.000 %	14.948 %	within
Sn 0.144 Re 10000 CL(80)	0.01205	0.01197	-0.701 %	±25.000 %	24.299 %	within
Sn 0.184 Re 500 CL(30)	0.04997	0.05983	19.729 %	±25.000 %	5.271 %	within
Sn 0.184 Re 500 CL(45)	0.0577	0.06281	8.845 %	±25.000 %	16.155 %	within
Sn 0.184 Re 500 CL(60)	0.04997	0.04895	-2.040 %	±25.000 %	22.960 %	within
Sn 0.184 Re 500 CL(80)	0.01974	0.01744	-11.611 %	±25.000 %	13.389 %	within
Sn 0.184 Re 1000 CL(30)	0.04997	0.05211	4.271 %	±25.000 %	20.729 %	within
Sn 0.184 Re 1000 CL(45)	0.0577	0.0547	-5.208 %	±25.000 %	19.792 %	within
Sn 0.184 Re 1000 CL(60)	0.04997	0.04263	-14.687 %	±25.000 %	10.313 %	within
Sn 0.184 Re 1000 CL(80)	0.01974	0.01519	-23.023 %	±25.000 %	1.977 %	within
Sn 0.184 Re 2000 CL(30)	0.04997	0.04908	-1.784 %	±25.000 %	23.216 %	within
Sn 0.184 Re 2000 CL(45)	0.0577	0.05152	-10.713 %	±25.000 %	14.287 %	within
Sn 0.184 Re 2000 CL(60)	0.04997	0.04016	-19.642 %	±25.000 %	5.358 %	within
Sn 0.184 Re 2000 CL(80)	0.01974	0.01431	-27.494 %	±25.000 %	-2.494 %	outside
Sn 0.184 Re 5000 CL(30)	0.04997	0.05379	7.638 %	±25.000 %	17.362 %	within
Sn 0.184 Re 5000 CL(45)	0.0577	0.05647	-2.147 %	±25.000 %	22.853 %	within
Sn 0.184 Re 5000 CL(60)	0.04997	0.04401	-11.932 %	±25.000 %	13.068 %	within
Sn 0.184 Re 5000 CL(80)	0.01974	0.01568	-20.537 %	±25.000 %	4.463 %	within
Sn 0.184 Re 10000 CL(30)	0.04997	0.05664	13.335 %	±25.000 %	11.665 %	within
Sn 0.184 Re 10000 CL(45)	0.0577	0.05945	3.032 %	±25.000 %	21.968 %	within
Sn 0.184 Re 10000 CL(60)	0.04997	0.04634	-7.272 %	±25.000 %	17.728 %	within
Sn 0.184 Re 10000 CL(80)	0.01974	0.01651	-16.332 %	±25.000 %	8.668 %	within
Sn 0.317 Re 500 CL(30)	0.1379	0.1383	0.278 %	±25.000 %	24.722 %	within
Sn 0.317 Re 500 CL(45)	0.1592	0.1451	-8.838 %	±25.000 %	16.162 %	within
Sn 0.317 Re 500 CL(60)	0.1379	0.1131	-17.954 %	±25.000 %	7.046 %	within
Sn 0.317 Re 500 CL(80)	0.05445	0.04031	-25.971 %	±25.000 %	-0.971 %	outside
Sn 0.317 Re 1000 CL(30)	0.1379	0.1202	-12.813 %	±25.000 %	12.187 %	within
Sn 0.317 Re 1000 CL(45)	0.1592	0.1262	-20.739 %	±25.000 %	4.261 %	within
Sn 0.317 Re 1000 CL(60)	0.1379	0.09836	-28.665 %	±25.000 %	-3.665 %	outside
Sn 0.317 Re 1000 CL(80)	0.05445	0.03505	-35.635 %	±25.000 %	-10.635 %	outside
Sn 0.317 Re 2000 CL(30)	0.1379	0.1132	-17.931 %	±25.000 %	7.069 %	within
Sn 0.317 Re 2000 CL(45)	0.1592	0.1188	-25.391 %	±25.000 %	-0.391 %	outside
Sn 0.317 Re 2000 CL(60)	0.1379	0.09258	-32.852 %	±25.000 %	-7.852 %	outside
Sn 0.317 Re 2000 CL(80)	0.05445	0.03299	-39.413 %	±25.000 %	-14.413 %	outside
Sn 0.317 Re 5000 CL(30)	0.1379	0.1241	-9.965 %	±25.000 %	15.035 %	within
Sn 0.317 Re 5000 CL(45)	0.1592	0.1303	-18.150 %	±25.000 %	6.850 %	within
Sn 0.317 Re 5000 CL(60)	0.1379	0.1016	-26.335 %	±25.000 %	-1.335 %	outside
Sn 0.317 Re 5000 CL(80)	0.05445	0.03619	-33.533 %	±25.000 %	-8.533 %	outside
Sn 0.317 Re 10000 CL(30)	0.1379	0.1308	-5.142 %	±25.000 %	19.858 %	within
Sn 0.317 Re 10000 CL(45)	0.1592	0.1373	-13.766 %	±25.000 %	11.234 %	within
Sn 0.317 Re 10000 CL(60)	0.1379	0.107	-22.389 %	±25.000 %	2.611 %	within
Sn 0.317 Re 10000 CL(80)	0.05445	0.03813	-29.972 %	±25.000 %	-4.972 %	outside

L6 ScreenKF2012 a3 0.07 b4 0.10, induction on, K = 1.16, C_D(0), tolerance 25 %

20 rows, 6 of 20 outside the tolerance.

Case	Measured	Model	Error	Tolerance	Margin	Result
Sn 0.130 Re 500 CD( 0)	0.1427	0.2087	46.254 %	±25.000 %	-21.254 %	outside
Sn 0.130 Re 1000 CD( 0)	0.1427	0.182	27.525 %	±25.000 %	-2.525 %	outside
Sn 0.130 Re 2000 CD( 0)	0.1427	0.1712	19.979 %	±25.000 %	5.021 %	within
Sn 0.130 Re 5000 CD( 0)	0.1427	0.1873	31.235 %	±25.000 %	-6.235 %	outside
Sn 0.130 Re 10000 CD( 0)	0.1427	0.1973	38.237 %	±25.000 %	-13.237 %	outside
Sn 0.144 Re 500 CD( 0)	0.1686	0.2345	39.146 %	±25.000 %	-14.146 %	outside
Sn 0.144 Re 1000 CD( 0)	0.1686	0.2045	21.314 %	±25.000 %	3.686 %	within
Sn 0.144 Re 2000 CD( 0)	0.1686	0.1922	14.029 %	±25.000 %	10.971 %	within
Sn 0.144 Re 5000 CD( 0)	0.1686	0.2101	24.655 %	±25.000 %	0.345 %	within
Sn 0.144 Re 10000 CD( 0)	0.1686	0.2214	31.372 %	±25.000 %	-6.372 %	outside
Sn 0.184 Re 500 CD( 0)	0.2517	0.3133	24.438 %	±25.000 %	0.562 %	within
Sn 0.184 Re 1000 CD( 0)	0.2517	0.273	8.462 %	±25.000 %	16.538 %	within
Sn 0.184 Re 2000 CD( 0)	0.2517	0.256	1.686 %	±25.000 %	23.314 %	within
Sn 0.184 Re 5000 CD( 0)	0.2517	0.2794	10.974 %	±25.000 %	14.026 %	within
Sn 0.184 Re 10000 CD( 0)	0.2517	0.2948	17.121 %	±25.000 %	7.879 %	within
Sn 0.317 Re 500 CD( 0)	0.6064	0.6513	7.409 %	±25.000 %	17.591 %	within
Sn 0.317 Re 1000 CD( 0)	0.6064	0.5674	-6.428 %	±25.000 %	18.572 %	within
Sn 0.317 Re 2000 CD( 0)	0.6064	0.5279	-12.935 %	±25.000 %	12.065 %	within
Sn 0.317 Re 5000 CD( 0)	0.6064	0.573	-5.505 %	±25.000 %	19.495 %	within
Sn 0.317 Re 10000 CD( 0)	0.6064	0.6073	0.152 %	±25.000 %	24.848 %	within

L6 ScreenKF2012 a3 0.07 b4 0.10, induction on, K = 1.16, C_L(theta), tolerance 25 %

80 rows, 34 of 80 outside the tolerance.

Case	Measured	Model	Error	Tolerance	Margin	Result
Sn 0.130 Re 500 CL(30)	0.02468	0.04307	74.482 %	±25.000 %	-49.482 %	outside
Sn 0.130 Re 500 CL(45)	0.0285	0.04521	58.620 %	±25.000 %	-33.620 %	outside
Sn 0.130 Re 500 CL(60)	0.02468	0.03524	42.758 %	±25.000 %	-17.758 %	outside
Sn 0.130 Re 500 CL(80)	0.009749	0.01256	28.809 %	±25.000 %	-3.809 %	outside
Sn 0.130 Re 1000 CL(30)	0.02468	0.03751	51.969 %	±25.000 %	-26.969 %	outside
Sn 0.130 Re 1000 CL(45)	0.0285	0.03938	38.153 %	±25.000 %	-13.153 %	outside
Sn 0.130 Re 1000 CL(60)	0.02468	0.03069	24.338 %	±25.000 %	0.662 %	within
Sn 0.130 Re 1000 CL(80)	0.009749	0.01094	12.189 %	±25.000 %	12.811 %	within
Sn 0.130 Re 2000 CL(30)	0.02468	0.03528	42.911 %	±25.000 %	-17.911 %	outside
Sn 0.130 Re 2000 CL(45)	0.0285	0.03703	29.919 %	±25.000 %	-4.919 %	outside
Sn 0.130 Re 2000 CL(60)	0.02468	0.02886	16.927 %	±25.000 %	8.073 %	within
Sn 0.130 Re 2000 CL(80)	0.009749	0.01029	5.502 %	±25.000 %	19.498 %	within
Sn 0.130 Re 5000 CL(30)	0.02468	0.03861	56.424 %	±25.000 %	-31.424 %	outside
Sn 0.130 Re 5000 CL(45)	0.0285	0.04053	42.203 %	±25.000 %	-17.203 %	outside
Sn 0.130 Re 5000 CL(60)	0.02468	0.03159	27.983 %	±25.000 %	-2.983 %	outside
Sn 0.130 Re 5000 CL(80)	0.009749	0.01126	15.478 %	±25.000 %	9.522 %	within
Sn 0.130 Re 10000 CL(30)	0.02468	0.04069	64.839 %	±25.000 %	-39.839 %	outside
Sn 0.130 Re 10000 CL(45)	0.0285	0.04271	49.854 %	±25.000 %	-24.854 %	outside
Sn 0.130 Re 10000 CL(60)	0.02468	0.03329	34.868 %	±25.000 %	-9.868 %	outside
Sn 0.130 Re 10000 CL(80)	0.009749	0.01186	21.691 %	±25.000 %	3.309 %	within
Sn 0.144 Re 500 CL(30)	0.03052	0.04846	58.803 %	±25.000 %	-33.803 %	outside
Sn 0.144 Re 500 CL(45)	0.03524	0.05087	44.367 %	±25.000 %	-19.367 %	outside
Sn 0.144 Re 500 CL(60)	0.03052	0.03965	29.930 %	±25.000 %	-4.930 %	outside
Sn 0.144 Re 500 CL(80)	0.01205	0.01413	17.235 %	±25.000 %	7.765 %	within
Sn 0.144 Re 1000 CL(30)	0.03052	0.0422	38.277 %	±25.000 %	-13.277 %	outside
Sn 0.144 Re 1000 CL(45)	0.03524	0.0443	25.706 %	±25.000 %	-0.706 %	outside
Sn 0.144 Re 1000 CL(60)	0.03052	0.03453	13.135 %	±25.000 %	11.865 %	within
Sn 0.144 Re 1000 CL(80)	0.01205	0.0123	2.081 %	±25.000 %	22.919 %	within
Sn 0.144 Re 2000 CL(30)	0.03052	0.03964	29.906 %	±25.000 %	-4.906 %	outside
Sn 0.144 Re 2000 CL(45)	0.03524	0.04161	18.096 %	±25.000 %	6.904 %	within
Sn 0.144 Re 2000 CL(60)	0.03052	0.03243	6.286 %	±25.000 %	18.714 %	within
Sn 0.144 Re 2000 CL(80)	0.01205	0.01156	-4.099 %	±25.000 %	20.901 %	within
Sn 0.144 Re 5000 CL(30)	0.03052	0.04337	42.118 %	±25.000 %	-17.118 %	outside
Sn 0.144 Re 5000 CL(45)	0.03524	0.04553	29.198 %	±25.000 %	-4.198 %	outside
Sn 0.144 Re 5000 CL(60)	0.03052	0.03548	16.279 %	±25.000 %	8.721 %	within
Sn 0.144 Re 5000 CL(80)	0.01205	0.01264	4.917 %	±25.000 %	20.083 %	within
Sn 0.144 Re 10000 CL(30)	0.03052	0.04573	49.849 %	±25.000 %	-24.849 %	outside
Sn 0.144 Re 10000 CL(45)	0.03524	0.048	36.226 %	±25.000 %	-11.226 %	outside
Sn 0.144 Re 10000 CL(60)	0.03052	0.03741	22.604 %	±25.000 %	2.396 %	within
Sn 0.144 Re 10000 CL(80)	0.01205	0.01333	10.624 %	±25.000 %	14.376 %	within
Sn 0.184 Re 500 CL(30)	0.04997	0.06498	30.026 %	±25.000 %	-5.026 %	outside
Sn 0.184 Re 500 CL(45)	0.0577	0.06821	18.206 %	±25.000 %	6.794 %	within
Sn 0.184 Re 500 CL(60)	0.04997	0.05316	6.385 %	±25.000 %	18.615 %	within
Sn 0.184 Re 500 CL(80)	0.01974	0.01894	-4.010 %	±25.000 %	20.990 %	within
Sn 0.184 Re 1000 CL(30)	0.04997	0.05654	13.134 %	±25.000 %	11.866 %	within
Sn 0.184 Re 1000 CL(45)	0.0577	0.05935	2.849 %	±25.000 %	22.151 %	within
Sn 0.184 Re 1000 CL(60)	0.04997	0.04626	-7.436 %	±25.000 %	17.564 %	within
Sn 0.184 Re 1000 CL(80)	0.01974	0.01648	-16.480 %	±25.000 %	8.520 %	within
Sn 0.184 Re 2000 CL(30)	0.04997	0.05297	5.987 %	±25.000 %	19.013 %	within
Sn 0.184 Re 2000 CL(45)	0.0577	0.0556	-3.648 %	±25.000 %	21.352 %	within
Sn 0.184 Re 2000 CL(60)	0.04997	0.04334	-13.283 %	±25.000 %	11.717 %	within
Sn 0.184 Re 2000 CL(80)	0.01974	0.01544	-21.756 %	±25.000 %	3.244 %	within
Sn 0.184 Re 5000 CL(30)	0.04997	0.05786	15.786 %	±25.000 %	9.214 %	within
Sn 0.184 Re 5000 CL(45)	0.0577	0.06074	5.260 %	±25.000 %	19.740 %	within
Sn 0.184 Re 5000 CL(60)	0.04997	0.04734	-5.266 %	±25.000 %	19.734 %	within
Sn 0.184 Re 5000 CL(80)	0.01974	0.01687	-14.522 %	±25.000 %	10.478 %	within
Sn 0.184 Re 10000 CL(30)	0.04997	0.06111	22.282 %	±25.000 %	2.718 %	within
Sn 0.184 Re 10000 CL(45)	0.0577	0.06415	11.166 %	±25.000 %	13.834 %	within
Sn 0.184 Re 10000 CL(60)	0.04997	0.05	0.049 %	±25.000 %	24.951 %	within
Sn 0.184 Re 10000 CL(80)	0.01974	0.01782	-9.727 %	±25.000 %	15.273 %	within
Sn 0.317 Re 500 CL(30)	0.1379	0.1377	-0.136 %	±25.000 %	24.864 %	within
Sn 0.317 Re 500 CL(45)	0.1592	0.1445	-9.215 %	±25.000 %	15.785 %	within
Sn 0.317 Re 500 CL(60)	0.1379	0.1127	-18.293 %	±25.000 %	6.707 %	within
Sn 0.317 Re 500 CL(80)	0.05445	0.04014	-26.277 %	±25.000 %	-1.277 %	outside
Sn 0.317 Re 1000 CL(30)	0.1379	0.1195	-13.350 %	±25.000 %	11.650 %	within
Sn 0.317 Re 1000 CL(45)	0.1592	0.1254	-21.227 %	±25.000 %	3.773 %	within
Sn 0.317 Re 1000 CL(60)	0.1379	0.09775	-29.104 %	±25.000 %	-4.104 %	outside
Sn 0.317 Re 1000 CL(80)	0.05445	0.03483	-36.031 %	±25.000 %	-11.031 %	outside
Sn 0.317 Re 2000 CL(30)	0.1379	0.111	-19.529 %	±25.000 %	5.471 %	within
Sn 0.317 Re 2000 CL(45)	0.1592	0.1165	-26.844 %	±25.000 %	-1.844 %	outside
Sn 0.317 Re 2000 CL(60)	0.1379	0.09078	-34.160 %	±25.000 %	-9.160 %	outside
Sn 0.317 Re 2000 CL(80)	0.05445	0.03235	-40.593 %	±25.000 %	-15.593 %	outside
Sn 0.317 Re 5000 CL(30)	0.1379	0.1207	-12.471 %	±25.000 %	12.529 %	within
Sn 0.317 Re 5000 CL(45)	0.1592	0.1267	-20.428 %	±25.000 %	4.572 %	within
Sn 0.317 Re 5000 CL(60)	0.1379	0.09874	-28.385 %	±25.000 %	-3.385 %	outside
Sn 0.317 Re 5000 CL(80)	0.05445	0.03519	-35.383 %	±25.000 %	-10.383 %	outside
Sn 0.317 Re 10000 CL(30)	0.1379	0.1281	-7.079 %	±25.000 %	17.921 %	within
Sn 0.317 Re 10000 CL(45)	0.1592	0.1345	-15.526 %	±25.000 %	9.474 %	within
Sn 0.317 Re 10000 CL(60)	0.1379	0.1048	-23.973 %	±25.000 %	1.027 %	within
Sn 0.317 Re 10000 CL(80)	0.05445	0.03735	-31.402 %	±25.000 %	-6.402 %	outside

L6 ScreenKF2012 a3 0.07 b4 0.10, induction off, K = 1.16, C_D(0), tolerance 25 %

20 rows, 15 of 20 outside the tolerance.

Case	Measured	Model	Error	Tolerance	Margin	Result
Sn 0.130 Re 500 CD( 0)	0.1427	0.2218	55.426 %	±25.000 %	-30.426 %	outside
Sn 0.130 Re 1000 CD( 0)	0.1427	0.1936	35.644 %	±25.000 %	-10.644 %	outside
Sn 0.130 Re 2000 CD( 0)	0.1427	0.1832	28.410 %	±25.000 %	-3.410 %	outside
Sn 0.130 Re 5000 CD( 0)	0.1427	0.2012	40.965 %	±25.000 %	-15.965 %	outside
Sn 0.130 Re 10000 CD( 0)	0.1427	0.2111	47.910 %	±25.000 %	-22.910 %	outside
Sn 0.144 Re 500 CD( 0)	0.1686	0.253	50.072 %	±25.000 %	-25.072 %	outside
Sn 0.144 Re 1000 CD( 0)	0.1686	0.2208	30.983 %	±25.000 %	-5.983 %	outside
Sn 0.144 Re 2000 CD( 0)	0.1686	0.2091	24.070 %	±25.000 %	0.930 %	within
Sn 0.144 Re 5000 CD( 0)	0.1686	0.2297	36.243 %	±25.000 %	-11.243 %	outside
Sn 0.144 Re 10000 CD( 0)	0.1686	0.2409	42.901 %	±25.000 %	-17.901 %	outside
Sn 0.184 Re 500 CD( 0)	0.2517	0.3527	40.089 %	±25.000 %	-15.089 %	outside
Sn 0.184 Re 1000 CD( 0)	0.2517	0.3079	22.308 %	±25.000 %	2.692 %	within
Sn 0.184 Re 2000 CD( 0)	0.2517	0.2922	16.057 %	±25.000 %	8.943 %	within
Sn 0.184 Re 5000 CD( 0)	0.2517	0.3211	27.562 %	±25.000 %	-2.562 %	outside
Sn 0.184 Re 10000 CD( 0)	0.2517	0.3364	33.644 %	±25.000 %	-8.644 %	outside
Sn 0.317 Re 500 CD( 0)	0.6064	0.8522	40.540 %	±25.000 %	-15.540 %	outside
Sn 0.317 Re 1000 CD( 0)	0.6064	0.7452	22.897 %	±25.000 %	2.103 %	within
Sn 0.317 Re 2000 CD( 0)	0.6064	0.7125	17.510 %	±25.000 %	7.490 %	within
Sn 0.317 Re 5000 CD( 0)	0.6064	0.7859	29.619 %	±25.000 %	-4.619 %	outside
Sn 0.317 Re 10000 CD( 0)	0.6064	0.8195	35.156 %	±25.000 %	-10.156 %	outside

L6 ScreenKF2012 a3 0.07 b4 0.10, induction off, K = 1.16, C_L(theta), tolerance 25 %

80 rows, 39 of 80 outside the tolerance.

Case	Measured	Model	Error	Tolerance	Margin	Result
Sn 0.130 Re 500 CL(30)	0.02468	0.04577	85.413 %	±25.000 %	-60.413 %	outside
Sn 0.130 Re 500 CL(45)	0.0285	0.04804	68.558 %	±25.000 %	-43.558 %	outside
Sn 0.130 Re 500 CL(60)	0.02468	0.03745	51.702 %	±25.000 %	-26.702 %	outside
Sn 0.130 Re 500 CL(80)	0.009749	0.01334	36.879 %	±25.000 %	-11.879 %	outside
Sn 0.130 Re 1000 CL(30)	0.02468	0.0399	61.636 %	±25.000 %	-36.636 %	outside
Sn 0.130 Re 1000 CL(45)	0.0285	0.04188	46.942 %	±25.000 %	-21.942 %	outside
Sn 0.130 Re 1000 CL(60)	0.02468	0.03264	32.248 %	±25.000 %	-7.248 %	outside
Sn 0.130 Re 1000 CL(80)	0.009749	0.01163	19.326 %	±25.000 %	5.674 %	within
Sn 0.130 Re 2000 CL(30)	0.02468	0.03776	52.955 %	±25.000 %	-27.955 %	outside
Sn 0.130 Re 2000 CL(45)	0.0285	0.03963	39.050 %	±25.000 %	-14.050 %	outside
Sn 0.130 Re 2000 CL(60)	0.02468	0.03089	25.145 %	±25.000 %	-0.145 %	outside
Sn 0.130 Re 2000 CL(80)	0.009749	0.01101	12.917 %	±25.000 %	12.083 %	within
Sn 0.130 Re 5000 CL(30)	0.02468	0.04148	68.027 %	±25.000 %	-43.027 %	outside
Sn 0.130 Re 5000 CL(45)	0.0285	0.04354	52.752 %	±25.000 %	-27.752 %	outside
Sn 0.130 Re 5000 CL(60)	0.02468	0.03394	37.477 %	±25.000 %	-12.477 %	outside
Sn 0.130 Re 5000 CL(80)	0.009749	0.01209	24.044 %	±25.000 %	0.956 %	within
Sn 0.130 Re 10000 CL(30)	0.02468	0.04354	76.373 %	±25.000 %	-51.373 %	outside
Sn 0.130 Re 10000 CL(45)	0.0285	0.0457	60.339 %	±25.000 %	-35.339 %	outside
Sn 0.130 Re 10000 CL(60)	0.02468	0.03562	44.305 %	±25.000 %	-19.305 %	outside
Sn 0.130 Re 10000 CL(80)	0.009749	0.01269	30.205 %	±25.000 %	-5.205 %	outside
Sn 0.144 Re 500 CL(30)	0.03052	0.05226	71.259 %	±25.000 %	-46.259 %	outside
Sn 0.144 Re 500 CL(45)	0.03524	0.05486	55.690 %	±25.000 %	-30.690 %	outside
Sn 0.144 Re 500 CL(60)	0.03052	0.04276	40.121 %	±25.000 %	-15.121 %	outside
Sn 0.144 Re 500 CL(80)	0.01205	0.01524	26.430 %	±25.000 %	-1.430 %	outside
Sn 0.144 Re 1000 CL(30)	0.03052	0.04556	49.289 %	±25.000 %	-24.289 %	outside
Sn 0.144 Re 1000 CL(45)	0.03524	0.04782	35.717 %	±25.000 %	-10.717 %	outside
Sn 0.144 Re 1000 CL(60)	0.03052	0.03727	22.146 %	±25.000 %	2.854 %	within
Sn 0.144 Re 1000 CL(80)	0.01205	0.01328	10.211 %	±25.000 %	14.789 %	within
Sn 0.144 Re 2000 CL(30)	0.03052	0.04313	41.345 %	±25.000 %	-16.345 %	outside
Sn 0.144 Re 2000 CL(45)	0.03524	0.04528	28.495 %	±25.000 %	-3.495 %	outside
Sn 0.144 Re 2000 CL(60)	0.03052	0.03529	15.646 %	±25.000 %	9.354 %	within
Sn 0.144 Re 2000 CL(80)	0.01205	0.01258	4.346 %	±25.000 %	20.654 %	within
Sn 0.144 Re 5000 CL(30)	0.03052	0.0474	55.337 %	±25.000 %	-30.337 %	outside
Sn 0.144 Re 5000 CL(45)	0.03524	0.04976	41.215 %	±25.000 %	-16.215 %	outside
Sn 0.144 Re 5000 CL(60)	0.03052	0.03878	27.094 %	±25.000 %	-2.094 %	outside
Sn 0.144 Re 5000 CL(80)	0.01205	0.01382	14.676 %	±25.000 %	10.324 %	within
Sn 0.144 Re 10000 CL(30)	0.03052	0.04974	63.000 %	±25.000 %	-38.000 %	outside
Sn 0.144 Re 10000 CL(45)	0.03524	0.05222	48.182 %	±25.000 %	-23.182 %	outside
Sn 0.144 Re 10000 CL(60)	0.03052	0.0407	33.363 %	±25.000 %	-8.363 %	outside
Sn 0.144 Re 10000 CL(80)	0.01205	0.0145	20.332 %	±25.000 %	4.668 %	within
Sn 0.184 Re 500 CL(30)	0.04997	0.07314	46.355 %	±25.000 %	-21.355 %	outside
Sn 0.184 Re 500 CL(45)	0.0577	0.07678	33.050 %	±25.000 %	-8.050 %	outside
Sn 0.184 Re 500 CL(60)	0.04997	0.05984	19.745 %	±25.000 %	5.255 %	within
Sn 0.184 Re 500 CL(80)	0.01974	0.02132	8.044 %	±25.000 %	16.956 %	within
Sn 0.184 Re 1000 CL(30)	0.04997	0.06375	27.560 %	±25.000 %	-2.560 %	outside
Sn 0.184 Re 1000 CL(45)	0.0577	0.06692	15.964 %	±25.000 %	9.036 %	within
Sn 0.184 Re 1000 CL(60)	0.04997	0.05216	4.367 %	±25.000 %	20.633 %	within
Sn 0.184 Re 1000 CL(80)	0.01974	0.01859	-5.830 %	±25.000 %	19.170 %	within
Sn 0.184 Re 2000 CL(30)	0.04997	0.06045	20.967 %	±25.000 %	4.033 %	within
Sn 0.184 Re 2000 CL(45)	0.0577	0.06346	9.970 %	±25.000 %	15.030 %	within
Sn 0.184 Re 2000 CL(60)	0.04997	0.04946	-1.027 %	±25.000 %	23.973 %	within
Sn 0.184 Re 2000 CL(80)	0.01974	0.01762	-10.697 %	±25.000 %	14.303 %	within
Sn 0.184 Re 5000 CL(30)	0.04997	0.06652	33.107 %	±25.000 %	-8.107 %	outside
Sn 0.184 Re 5000 CL(45)	0.0577	0.06983	21.006 %	±25.000 %	3.994 %	within
Sn 0.184 Re 5000 CL(60)	0.04997	0.05442	8.905 %	±25.000 %	16.095 %	within
Sn 0.184 Re 5000 CL(80)	0.01974	0.01939	-1.736 %	±25.000 %	23.264 %	within
Sn 0.184 Re 10000 CL(30)	0.04997	0.06973	39.535 %	±25.000 %	-14.535 %	outside
Sn 0.184 Re 10000 CL(45)	0.0577	0.0732	26.850 %	±25.000 %	-1.850 %	outside
Sn 0.184 Re 10000 CL(60)	0.04997	0.05705	14.165 %	±25.000 %	10.835 %	within
Sn 0.184 Re 10000 CL(80)	0.01974	0.02033	3.010 %	±25.000 %	21.990 %	within
Sn 0.317 Re 500 CL(30)	0.1379	0.18	30.551 %	±25.000 %	-5.551 %	outside
Sn 0.317 Re 500 CL(45)	0.1592	0.189	18.683 %	±25.000 %	6.317 %	within
Sn 0.317 Re 500 CL(60)	0.1379	0.1473	6.815 %	±25.000 %	18.185 %	within
Sn 0.317 Re 500 CL(80)	0.05445	0.05248	-3.622 %	±25.000 %	21.378 %	within
Sn 0.317 Re 1000 CL(30)	0.1379	0.1568	13.729 %	±25.000 %	11.271 %	within
Sn 0.317 Re 1000 CL(45)	0.1592	0.1646	3.390 %	±25.000 %	21.610 %	within
Sn 0.317 Re 1000 CL(60)	0.1379	0.1283	-6.949 %	±25.000 %	18.051 %	within
Sn 0.317 Re 1000 CL(80)	0.05445	0.04572	-16.041 %	±25.000 %	8.959 %	within
Sn 0.317 Re 2000 CL(30)	0.1379	0.1498	8.616 %	±25.000 %	16.384 %	within
Sn 0.317 Re 2000 CL(45)	0.1592	0.1572	-1.258 %	±25.000 %	23.742 %	within
Sn 0.317 Re 2000 CL(60)	0.1379	0.1225	-11.132 %	±25.000 %	13.868 %	within
Sn 0.317 Re 2000 CL(80)	0.05445	0.04366	-19.815 %	±25.000 %	5.185 %	within
Sn 0.317 Re 5000 CL(30)	0.1379	0.1656	20.124 %	±25.000 %	4.876 %	within
Sn 0.317 Re 5000 CL(45)	0.1592	0.1739	9.204 %	±25.000 %	15.796 %	within
Sn 0.317 Re 5000 CL(60)	0.1379	0.1355	-1.717 %	±25.000 %	23.283 %	within
Sn 0.317 Re 5000 CL(80)	0.05445	0.04829	-11.320 %	±25.000 %	13.680 %	within
Sn 0.317 Re 10000 CL(30)	0.1379	0.1729	25.405 %	±25.000 %	-0.405 %	outside
Sn 0.317 Re 10000 CL(45)	0.1592	0.1815	14.005 %	±25.000 %	10.995 %	within
Sn 0.317 Re 10000 CL(60)	0.1379	0.1415	2.604 %	±25.000 %	22.396 %	within
Sn 0.317 Re 10000 CL(80)	0.05445	0.05041	-7.421 %	±25.000 %	17.579 %	within

L6 default law, K = 1, C_D(0), at the plan text's 20 % spread (reported)

reported; 20 rows, 4 of 20 outside the tolerance.

Case	Measured	Model	Error	Tolerance	Margin	Result
Sn 0.130 Re 500 CD( 0)	0.1427	0.1775	24.355 %	±20.000 %	-4.355 %	outside
Sn 0.130 Re 1000 CD( 0)	0.1427	0.1547	8.400 %	±20.000 %	11.600 %	within
Sn 0.130 Re 2000 CD( 0)	0.1427	0.1452	1.730 %	±20.000 %	18.270 %	within
Sn 0.130 Re 5000 CD( 0)	0.1427	0.1585	11.096 %	±20.000 %	8.904 %	within
Sn 0.130 Re 10000 CD( 0)	0.1427	0.1672	17.185 %	±20.000 %	2.815 %	within
Sn 0.144 Re 500 CD( 0)	0.1686	0.199	18.063 %	±20.000 %	1.937 %	within
Sn 0.144 Re 1000 CD( 0)	0.1686	0.1735	2.902 %	±20.000 %	17.098 %	within
Sn 0.144 Re 2000 CD( 0)	0.1686	0.1626	-3.550 %	±20.000 %	16.450 %	within
Sn 0.144 Re 5000 CD( 0)	0.1686	0.1774	5.241 %	±20.000 %	14.759 %	within
Sn 0.144 Re 10000 CD( 0)	0.1686	0.1872	11.086 %	±20.000 %	8.914 %	within
Sn 0.184 Re 500 CD( 0)	0.2517	0.264	4.861 %	±20.000 %	15.139 %	within
Sn 0.184 Re 1000 CD( 0)	0.2517	0.23	-8.631 %	±20.000 %	11.369 %	within
Sn 0.184 Re 2000 CD( 0)	0.2517	0.2148	-14.668 %	±20.000 %	5.332 %	within
Sn 0.184 Re 5000 CD( 0)	0.2517	0.2338	-7.124 %	±20.000 %	12.876 %	within
Sn 0.184 Re 10000 CD( 0)	0.2517	0.2473	-1.770 %	±20.000 %	18.230 %	within
Sn 0.317 Re 500 CD( 0)	0.6064	0.5296	-12.654 %	±20.000 %	7.346 %	within
Sn 0.317 Re 1000 CD( 0)	0.6064	0.4614	-23.909 %	±20.000 %	-3.909 %	outside
Sn 0.317 Re 2000 CD( 0)	0.6064	0.4257	-29.786 %	±20.000 %	-9.786 %	outside
Sn 0.317 Re 5000 CD( 0)	0.6064	0.4588	-24.333 %	±20.000 %	-4.333 %	outside
Sn 0.317 Re 10000 CD( 0)	0.6064	0.4886	-19.425 %	±20.000 %	0.575 %	within

L6 default law, K = 1, C_L(theta), at the plan text's 20 % spread (reported)

reported; 80 rows, 38 of 80 outside the tolerance.

Case	Measured	Model	Error	Tolerance	Margin	Result
Sn 0.130 Re 500 CL(30)	0.02468	0.03657	48.140 %	±20.000 %	-28.140 %	outside
Sn 0.130 Re 500 CL(45)	0.0285	0.03839	34.673 %	±20.000 %	-14.673 %	outside
Sn 0.130 Re 500 CL(60)	0.02468	0.02992	21.205 %	±20.000 %	-1.205 %	outside
Sn 0.130 Re 500 CL(80)	0.009749	0.01066	9.362 %	±20.000 %	10.638 %	within
Sn 0.130 Re 1000 CL(30)	0.02468	0.03185	29.012 %	±20.000 %	-9.012 %	outside
Sn 0.130 Re 1000 CL(45)	0.0285	0.03343	17.284 %	±20.000 %	2.716 %	within
Sn 0.130 Re 1000 CL(60)	0.02468	0.02606	5.556 %	±20.000 %	14.444 %	within
Sn 0.130 Re 1000 CL(80)	0.009749	0.009285	-4.758 %	±20.000 %	15.242 %	within
Sn 0.130 Re 2000 CL(30)	0.02468	0.02987	21.027 %	±20.000 %	-1.027 %	outside
Sn 0.130 Re 2000 CL(45)	0.0285	0.03136	10.024 %	±20.000 %	9.976 %	within
Sn 0.130 Re 2000 CL(60)	0.02468	0.02444	-0.978 %	±20.000 %	19.022 %	within
Sn 0.130 Re 2000 CL(80)	0.009749	0.00871	-10.654 %	±20.000 %	9.346 %	within
Sn 0.130 Re 5000 CL(30)	0.02468	0.03264	32.242 %	±20.000 %	-12.242 %	outside
Sn 0.130 Re 5000 CL(45)	0.0285	0.03427	20.220 %	±20.000 %	-0.220 %	outside
Sn 0.130 Re 5000 CL(60)	0.02468	0.02671	8.198 %	±20.000 %	11.802 %	within
Sn 0.130 Re 5000 CL(80)	0.009749	0.009517	-2.374 %	±20.000 %	17.626 %	within
Sn 0.130 Re 10000 CL(30)	0.02468	0.03444	39.539 %	±20.000 %	-19.539 %	outside
Sn 0.130 Re 10000 CL(45)	0.0285	0.03616	26.854 %	±20.000 %	-6.854 %	outside
Sn 0.130 Re 10000 CL(60)	0.02468	0.02818	14.169 %	±20.000 %	5.831 %	within
Sn 0.130 Re 10000 CL(80)	0.009749	0.01004	3.013 %	±20.000 %	16.987 %	within
Sn 0.144 Re 500 CL(30)	0.03052	0.04105	34.513 %	±20.000 %	-14.513 %	outside
Sn 0.144 Re 500 CL(45)	0.03524	0.04309	22.285 %	±20.000 %	-2.285 %	outside
Sn 0.144 Re 500 CL(60)	0.03052	0.03359	10.056 %	±20.000 %	9.944 %	within
Sn 0.144 Re 500 CL(80)	0.01205	0.01197	-0.697 %	±20.000 %	19.303 %	within
Sn 0.144 Re 1000 CL(30)	0.03052	0.03574	17.116 %	±20.000 %	2.884 %	within
Sn 0.144 Re 1000 CL(45)	0.03524	0.03752	6.469 %	±20.000 %	13.531 %	within
Sn 0.144 Re 1000 CL(60)	0.03052	0.02924	-4.178 %	±20.000 %	15.822 %	within
Sn 0.144 Re 1000 CL(80)	0.01205	0.01042	-13.540 %	±20.000 %	6.460 %	within
Sn 0.144 Re 2000 CL(30)	0.03052	0.03348	9.723 %	±20.000 %	10.277 %	within
Sn 0.144 Re 2000 CL(45)	0.03524	0.03515	-0.252 %	±20.000 %	19.748 %	within
Sn 0.144 Re 2000 CL(60)	0.03052	0.0274	-10.227 %	±20.000 %	9.773 %	within
Sn 0.144 Re 2000 CL(80)	0.01205	0.009762	-18.999 %	±20.000 %	1.001 %	within
Sn 0.144 Re 5000 CL(30)	0.03052	0.03656	19.798 %	±20.000 %	0.202 %	within
Sn 0.144 Re 5000 CL(45)	0.03524	0.03838	8.907 %	±20.000 %	11.093 %	within
Sn 0.144 Re 5000 CL(60)	0.03052	0.02991	-1.983 %	±20.000 %	18.017 %	within
Sn 0.144 Re 5000 CL(80)	0.01205	0.01066	-11.561 %	±20.000 %	8.439 %	within
Sn 0.144 Re 10000 CL(30)	0.03052	0.0386	26.503 %	±20.000 %	-6.503 %	outside
Sn 0.144 Re 10000 CL(45)	0.03524	0.04052	15.003 %	±20.000 %	4.997 %	within
Sn 0.144 Re 10000 CL(60)	0.03052	0.03159	3.502 %	±20.000 %	16.498 %	within
Sn 0.144 Re 10000 CL(80)	0.01205	0.01126	-6.611 %	±20.000 %	13.389 %	within
Sn 0.184 Re 500 CL(30)	0.04997	0.05462	9.296 %	±20.000 %	10.704 %	within
Sn 0.184 Re 500 CL(45)	0.0577	0.05734	-0.640 %	±20.000 %	19.360 %	within
Sn 0.184 Re 500 CL(60)	0.04997	0.04469	-10.576 %	±20.000 %	9.424 %	within
Sn 0.184 Re 500 CL(80)	0.01974	0.01592	-19.313 %	±20.000 %	0.687 %	within
Sn 0.184 Re 1000 CL(30)	0.04997	0.04752	-4.904 %	±20.000 %	15.096 %	within
Sn 0.184 Re 1000 CL(45)	0.0577	0.04989	-13.549 %	±20.000 %	6.451 %	within
Sn 0.184 Re 1000 CL(60)	0.04997	0.03888	-22.194 %	±20.000 %	-2.194 %	outside
Sn 0.184 Re 1000 CL(80)	0.01974	0.01386	-29.797 %	±20.000 %	-9.797 %	outside
Sn 0.184 Re 2000 CL(30)	0.04997	0.04435	-11.245 %	±20.000 %	8.755 %	within
Sn 0.184 Re 2000 CL(45)	0.0577	0.04656	-19.314 %	±20.000 %	0.686 %	within
Sn 0.184 Re 2000 CL(60)	0.04997	0.03629	-27.382 %	±20.000 %	-7.382 %	outside
Sn 0.184 Re 2000 CL(80)	0.01974	0.01293	-34.478 %	±20.000 %	-14.478 %	outside
Sn 0.184 Re 5000 CL(30)	0.04997	0.04831	-3.320 %	±20.000 %	16.680 %	within
Sn 0.184 Re 5000 CL(45)	0.0577	0.05072	-12.109 %	±20.000 %	7.891 %	within
Sn 0.184 Re 5000 CL(60)	0.04997	0.03953	-20.898 %	±20.000 %	-0.898 %	outside
Sn 0.184 Re 5000 CL(80)	0.01974	0.01409	-28.627 %	±20.000 %	-8.627 %	outside
Sn 0.184 Re 10000 CL(30)	0.04997	0.05113	2.312 %	±20.000 %	17.688 %	within
Sn 0.184 Re 10000 CL(45)	0.0577	0.05367	-6.989 %	±20.000 %	13.011 %	within
Sn 0.184 Re 10000 CL(60)	0.04997	0.04183	-16.290 %	±20.000 %	3.710 %	within
Sn 0.184 Re 10000 CL(80)	0.01974	0.01491	-24.469 %	±20.000 %	-4.469 %	outside
Sn 0.317 Re 500 CL(30)	0.1379	0.1112	-19.376 %	±20.000 %	0.624 %	within
Sn 0.317 Re 500 CL(45)	0.1592	0.1167	-26.706 %	±20.000 %	-6.706 %	outside
Sn 0.317 Re 500 CL(60)	0.1379	0.09095	-34.035 %	±20.000 %	-14.035 %	outside
Sn 0.317 Re 500 CL(80)	0.05445	0.03241	-40.481 %	±20.000 %	-20.481 %	outside
Sn 0.317 Re 1000 CL(30)	0.1379	0.09653	-29.988 %	±20.000 %	-9.988 %	outside
Sn 0.317 Re 1000 CL(45)	0.1592	0.1013	-36.352 %	±20.000 %	-16.352 %	outside
Sn 0.317 Re 1000 CL(60)	0.1379	0.07898	-42.717 %	±20.000 %	-22.717 %	outside
Sn 0.317 Re 1000 CL(80)	0.05445	0.02814	-48.314 %	±20.000 %	-28.314 %	outside
Sn 0.317 Re 2000 CL(30)	0.1379	0.08893	-35.503 %	±20.000 %	-15.503 %	outside
Sn 0.317 Re 2000 CL(45)	0.1592	0.09335	-41.366 %	±20.000 %	-21.366 %	outside
Sn 0.317 Re 2000 CL(60)	0.1379	0.07276	-47.229 %	±20.000 %	-27.229 %	outside
Sn 0.317 Re 2000 CL(80)	0.05445	0.02593	-52.386 %	±20.000 %	-32.386 %	outside
Sn 0.317 Re 5000 CL(30)	0.1379	0.09598	-30.386 %	±20.000 %	-10.386 %	outside
Sn 0.317 Re 5000 CL(45)	0.1592	0.1008	-36.714 %	±20.000 %	-16.714 %	outside
Sn 0.317 Re 5000 CL(60)	0.1379	0.07853	-43.043 %	±20.000 %	-23.043 %	outside
Sn 0.317 Re 5000 CL(80)	0.05445	0.02798	-48.608 %	±20.000 %	-28.608 %	outside
Sn 0.317 Re 10000 CL(30)	0.1379	0.1024	-25.768 %	±20.000 %	-5.768 %	outside
Sn 0.317 Re 10000 CL(45)	0.1592	0.1074	-32.516 %	±20.000 %	-12.516 %	outside
Sn 0.317 Re 10000 CL(60)	0.1379	0.08374	-39.265 %	±20.000 %	-19.265 %	outside
Sn 0.317 Re 10000 CL(80)	0.05445	0.02984	-45.199 %	±20.000 %	-25.199 %	outside

Data provenance

Every measured number in the tables above comes from these files (contract C6); the header of each gives the paper, the table or figure, how it was obtained and its uncertainty.

rudi1988_kf2012fig5_digitised.csv

tests/data/rudi1988_kf2012fig5_digitised.csv, 24 rows.

Field	Value
source	Rudi H, Loland G, Furunes I (1988), Modellforsok med noter. Krefter og gjennomstromning pa enkeltpaneler og merdsystemer, SINTEF report (in Norwegian); available only via Kristiansen T, Faltinsen OM (2012), Modelling of current loads on aquaculture net cages, J. Fluids Struct. 34, 218-235 (KF2012)
location	KF2012 Fig. 5 (journal p. 224, PDF p. 7)
kind	digitised
uncertainty	+-0.005 (marker centres read from the PDF vector drawing, axes calibrated on the tick marks; not eye-read)
units	sn [-], theta_deg [deg], cd_over_cd0 [-], cl_over_cl45 [-]
notes	Rudi 1988 itself is not in background/; these values are KF2012's plot of it. The report is dated 1988 in KF2012 and 1989 in MF2022 ref. [7].
notes	Flat 1.5 x 1.5 m panels on a stiff frame, angles 0-90 deg; each value is the average over the three towing speeds 0.159, 0.316 and 0.966 m/s (KF2012 p. 224). Drag normalised by its theta = 0 value, lift by its theta = 45 deg value. The Sn = 0.243 net deformed strongly and is not plotted by KF2012.
notes	The Sn = 0.144 triangle markers sit 0.004 above their data point in the drawing (their bounding-box centre reads 1.004 at both normalisation points and 0.004 at the lift zeros); 0.004 is subtracted from every 0.144 value.
notes	Where two nets share a position the markers coincide in the drawing (e.g. all four at cd_over_cd0 = 1 at 0 deg). The 1.000 values at the normalisation angles are read from the figure, not set.

sn	theta_deg	cd_over_cd0	cl_over_cl45
0.130	0	1.000	0.000
0.130	30	0.845	1.000
0.130	45	0.655	1.000
0.130	60	0.483	0.909
0.130	80	0.276	0.455
0.130	90	0.000	0.000
0.144	0	1.000	0.000
0.144	30	0.778	1.091
0.144	45	0.635	1.000
0.144	60	0.492	0.909
0.144	80	0.238	0.636
0.144	90	0.032	0.000
0.184	0	1.000	0.000
0.184	30	0.736	1.000
0.184	45	0.626	1.000
0.184	60	0.549	0.800
0.184	80	0.231	0.350
0.184	90	0.011	0.000
0.317	0	1.000	0.000
0.317	30	0.792	1.019
0.317	45	0.575	1.000
0.317	60	0.389	0.769
0.317	80	0.131	0.308
0.317	90	0.023	0.000

loland1991_eq4.csv

tests/data/loland1991_eq4.csv, 3 rows.

Field	Value
source	Loland G (1991), Current forces on and flow through fish farms, PhD thesis, Norwegian Institute of Technology, Trondheim; available only via Kristiansen T, Faltinsen OM (2012), J. Fluids Struct. 34, 218-235 (KF2012)
location	KF2012 Eq. 4 (journal p. 222, PDF p. 5); KF2012 Eq. 15 (journal p. 226) in the notes
kind	equation
uncertainty	coefficients copied exactly from KF2012 Eq. 4 (checked on the page image); the fit is to Rudi et al. (1988) towed panels
units	quantity_id [-], angle_fn [-], c0 [-], c1 [-], c2 [-], c3 [-], sn_min [-], sn_max [-]
notes	The coefficient = c0 + c1 Sn + c2 Sn^2 + c3 Sn^3 multiplies the angle function angle_fn: 0 = 1, 1 = cos(theta), 2 = sin(2 theta); a quantity is the sum of its rows. quantity_id 1 = C_D, 2 = C_L, both on the panel area and the free-stream speed (KF2012 Eq. 1).
notes	As printed: C_D(Sn, theta) = 0.04 + (-0.04 + 0.33 Sn + 6.54 Sn^2 - 4.88 Sn^3) cos(theta); C_L(Sn, theta) = (-0.05 Sn + 2.3 Sn^2 - 1.76 Sn^3) sin(2 theta); valid for Sn 0.13-0.317 and theta 0-90 deg. KF2012 §2.5.1: Loland's C_D(0) agrees with KF Eq. 9 for Re >~ 500.
notes	Loland's wake engineering formula, quoted by KF2012 Eq. 15 and not a row: r = 1.0 - 0.46 c_d, with c_d = C_D(0). The thesis itself is not in background/.

quantity_id	angle_fn	c0	c1	c2	c3	sn_min	sn_max
1	0	0.04	0	0	0	0.13	0.317
1	1	-0.04	0.33	6.54	-4.88	0.13	0.317
2	2	0	-0.05	2.3	-1.76	0.13	0.317

Table of Contents