TCP client

TCP/IP client.

Collaboration diagram for TCP client:

Author

Biao Su

This class enables communications via TCP interface. It creats a TCP/IP client on Localhost (127.0.0.1 Port number: 5000), or a specified IP address and port number. At present it can only send messages consist of double precision numbers (8 Bytes).

Example configuration excerpt

<Lib
  LibName                     = "aquarobotics_interfaces"
  SimObject                   = "TCP/client"
  Name                        = "TCP"
  ServerIPAddress             = "127.0.0.1"
  ServerPortNumber            = "5000"
  NumberOfMessagesToSend      = "4"
  NumberOfMessagesToReceive   = "6"
  SetInitialMessagesToReceive = "false"
  ShowTCPResultOnScreen       = "false"
  ReceiveInMultipleRounds     = "false"
  CommunicationInterval       = "1"
  CommunicationStartingTime   = "0"
/>

Input ports

Name	Width	Description
MessagesToSend	<NumberOfMessagesToSend>	A vector of values received from client.

Output ports

Name	Width	Description
MessagesReceived	<NumberOfMessagesToReceive>	A vector of values to be sent to client.

Configuration parameters

Name	Width	Description
ServerIPAddress	1	The server IP address.
ServerPortNumber	1	The server port number.
NumberOfMessagesToSend	1	The number of double values to send.
NumberOfMessagesToReceive	1	The number of double values to receive.
SetInitialMessagesToReceive	1	If enabled the initial value of MessagesReceived can be set by a configuration parameter. If not it is zero by default.
InitialMessagesToReceive	<NumberOfMessagesToReceive>	The initial value of MessagesReceived.
ShowTCPResultOnScreen	1	Log the activity of the TCP server to file and console.
ReceiveInMultipleRounds	1	This enables the possibility to receive the output vector of size NumberOfMessagesToReceive through several UDP packets.
CommunicationInterval	1	The interval between reading and writing messages.
CommunicationStartingTime	1	The startup time for reading and writing messages.