CSV Sink

Write comma-separated values to file.

Collaboration diagram for CSV Sink:

This SimObject writes comma-separated values of input port values to file. Simulation time will also be included in the output file. A header is added with contents T,[FileName]_0, .. ,[FileName]_[PortWidth - 1] An output line is added for each major time step.

Example configuration excerpt

<Lib
  LibName      = "fhsim_base"
  SimObject    = "Sink/CSV"
  Name         = "csv"
  FileName     = "outfile_CSVSink.csv"
  PortWidth    = "1"
/>
 
<Connection
  csv.In = "Some.Out" <!-- From somewhere -->
/>

Input Ports

Name	Width	Description
In	1	Input signal.

Output Ports

This SimObject does not contain any outputs.

Configuration parameters

Name	Width	Description
FileName	1	File name to write to. .csv will be appended.
PortWidth	1	Size of the input port In.

Initial conditions

This SimObject does not contain any initial conditions.

Full example file

<Contents>
  <OBJECTS>
 
    <Lib
        LibName="base"
        SimObject="Sink/CSV"
        Name="F"
        FileName="outfile_CSVSink.csv"
        PortWidth="1"
    />
 
    <Lib
        LibName="base"
        SimObject="Src/Sine"
        Name="A"
        FHz="1"
        PhaseRad ="0"
    />
 
  </OBJECTS>
 
  <INTERCONNECTIONS>
    <Connection
      F.In="A.Out"
    />
  </INTERCONNECTIONS>
 
  <INITIALIZATION>
    <InitialCondition
    />
  </INITIALIZATION>
 
  <SIMULATION>
    <Timing TStart="0" TEnd="10"/>
    <Integrator Method="RK45_i" NumCores="1" LogStates="1" UseRSSNorm="0">
      <StepControl Step="0.1" StepMax="0.002" StepMin="0.00000001" AbsTol="1e-3" RelTol="1e-3"/>
    </Integrator>
    
  </SIMULATION>
 
<OBSERVERS>
    <FileOutput TOutput="0, 0:0.1:10, 20" Select="objects:all"/>
  </OBSERVERS>
</Contents>

This SimObject is referred to as Sink/CSV