Passthrough

Simply pass input to output port.

Collaboration diagram for Passthrough:

An object to simply pass the input port to the output port. Useful for constructing system abstraction of model collections

Example configuration excerpt

<Lib
  LibName   = "fhsim_base"
  SimObject = "System/Passthrough"
  Name      = "A"
  PortWidth = "2"
/>
...
<Connection
  A.In = "2,1"
/>

Input Ports

Name	Width	Description
In	<PortWidth>	The input port.

Output Ports

Name	Width	Description
Out	<PortWidth>	The width of the signal (input and output ports)

Configuration parameters

Name	Width	Description
PortWidth	1	The width of the signal (input and output ports)

Initial conditions

There are no initial conditions for this function.

Full example file

<Contents>
  <OBJECTS>
    <Lib
        LibName="base" 
        SimObject="System/Passthrough"  
        Name="A" 
        PortWidth="1"
    />
  </OBJECTS>
  
  <INTERCONNECTIONS>
    <Connection
    A.In="20"
    />
  </INTERCONNECTIONS>
 
  <INITIALIZATION>
    <InitialCondition
    />
  </INITIALIZATION>
 
  <SIMULATION>
    <Timing TStart="0" TEnd="2.0"/>
    <Integrator Method="RK45_i" NumCores="1" LogStates="1" UseRSSNorm="0">
      <StepControl StepMax="0.002" StepMin="0.00000001" AbsTol="1e-3" RelTol="1e-3"/>
    </Integrator>
    
  </SIMULATION>
 
<OBSERVERS>
    <FileOutput TOutput="0, 1, 30" Select="objects:all"/>
  </OBSERVERS>
</Contents>

This SimObject is referred to as System/Passthrough